2-347-836-21 (1) Digital Powered Mixer Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Note The supplied CD-ROM includes operating instructions for the SRP-X700P Digital Powered Mixer (English, Japanese, French, German, Spanish, Italian and Chinese versions). SRP-X700P Ver. 1.
WARNING For customers in the U.S.A. To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Table of Contents Features Features ......................................................................................... 3 The SRP-X700P is a versatile digital powered mixer that incorporates an audio mixer, RGB/video switcher, processor and power amplifier in the 3U rack size. Location and function of parts .................................................... 4 Front panel ................................................................................. 4 Rear panel ...............................
Location and function of parts Front panel 1 3 MIC3 MIC4 8 MIC1/WL1 MIC2/WL2 MIC5/LINE1 MIC6/LINE2 LINE3 LINE4 SIGNAL OVER GAIN SIGNAL OVER GAIN SIGNAL OVER GAIN SIGNAL OVER GAIN SIGNAL OVER GAIN SIGNAL OVER GAIN SIGNAL OVER GAIN SIGNAL OVER GAIN - - - - - - - - POWER VU 1 +3 0 -5 -10 -20 2 3 OUTPUT 4 5 6 6 7 8 VU +3 0 -5 -10 -20 7 MASTER A MASTER B PROTECTION CLIP OVER GAIN - LINE 4 SELECT A MASTER OVER GAIN - SCENE RECALL B A ON 9 0 qa OFF A B LOCK B
7 Power amplifier indicators • PROTECTION indicator The PROTECTION indicator lights in red when the protection circuit of the internal power amplifier works. • CLIP indicator The CLIP indicator lights in red when the output level of the internal power amplifier is excessive such that the output signal is distorted.
Location and function of parts Rear panel qh qa ANT IN a LINE4 INPUT DC 9V OUT 35mA MAX 0 ANT IN b 9 OUTPUT DC 9V OUT 35mA MAX S VIDEO VIDEO qd S VIDEO VIDEO R/R-Y G/Y COMPONENT/RGB w; SPEAKERS B/B-Y SYNC/HD CH-2 CH-1 IMPEDANCE USE 4-16 IMPEDANCE USE 4-16 VD 5 CIRCUIT BREAKER PUSH RESET 70V LINE IMPEDANCE USE 32 -10k A LINE3 IN B C D FRONT L L L E REAR CENTER FRONT REAR R 3 4 +48V +48V +48V +48V ON ON ON ON 1 OFF 2 4 OUT RS-232C PARALLEL RS-232C q
0 Video output terminals The video signal that is selected by the LINE 4 SELECT button on the front panel is output from this terminal. (The video signal format is not converted from each other.) • 5BNC output terminals The RGB and component signal output terminals. • VIDEO terminal The composite signal output terminal. • S VIDEO terminal The S VIDEO signal output terminal.
Location and function of parts Tuner Unit How to install the tuner unit Please refer to the table Sony 800 MHz-band system models frequency range in the Operating Manual of Wireless Microphone or Transmitter. 1 1 Turn off the power of this unit. 2 Remove the tuner cover. 3 Check the up and down sides of the tuner unit, and insert it into 3 GP AF BATT RF the slot. (Fig.
How to Control the Display from the SRP-X700P For the projectors that the SRP-X700P supports by default, refer to the “List of supported projectors” on a separate document. PROJECTOR CONTROL RS-232C Terminal To connect the RS-232C terminal of applicable projectors and that of plasma display to this terminal; This model can switch the input signals and power ON/STANDBY of the projector and plasma display in interlocked condition. (D-sub 9-pin, male) Pin No.
How to Control the SRP-X700P from External Equipment REMOTE PARALLEL Terminal The REMOTE PARALLEL terminal enables the SRP-X700P to be remotely controlled with a simple circuit connected externally to this terminal.
How to Control AV Equipment from the SRP-X700P The SRP-X700P can control the Sony equipment connected to the CONTROL S OUTPUT1 through 4 terminals. The functions which can be operated are as follows. Note that the functions of REC, POWER ON, and POWER STANDBY cannot be operated from the supplied software SRP-X700P Manager and User Control Panel, to prevent the system from malfunctioning. PREV. NEXT STOP REW. PLAY F.F.
PC 1 CD player DVD player REAR OFF 4 R L ON REAR OFF +48V FRONT WOOFER CENTER AUDIO PC 2 ON +48V 3 WOOFER CENTER E AUDIO OFF R L MIC INPUT FRONT D RGB ON C COMPONENT/RGB RGB 5.
PC 1 CD player DVD player REAR OFF 4 R L ON REAR OFF +48V FRONT WOOFER CENTER AUDIO PC 2 ON +48V 3 WOOFER CENTER E AUDIO OFF R L MIC INPUT FRONT D RGB ON C COMPONENT/RGB RGB 5.
System Configuration System example when operating the SRP-X700P from the REMOTE PARALLEL terminal The REMOTE PARALLEL terminal of the SRP-X700P is shipped from the factory with the default setting on the premise of the external operation panel as described below. START VHS DV Camera Stand DVD PC1 PC2 MIC AV FINISH EMG STOP START button (SCENE No. 1 recall): Sets OUTPUT7 and OUTPUT9 to ON to lower the screen, to close the curtain, to darken the illumination and to start presentation.
Default settings INPUT AUTOMATIC MIXER SETUP Item Initial setting MIC1 - MIC4 TRIM LCF Item –60 dBu ON/OFF DEFAULT/EDIT Initial setting ON MIC5/LINE1, MIC6/LINE2 +4 dBu LINE3, LINE4A - 4F –10 dBu THRESHOLD –3 dB MIC1 - MIC4 ON RATIO 3:1 MIC5/LINE1, MIC6/LINE2 OFF COMPRESSOR DEFAULT ATTACK 22 ms RELEASE 100 ms THRESHOLD –30 dB PEQ OFF FR OFF COMP OFF MUTING OFF GAIN LIMIT +10 dB INPUT FADER 0 dB ONLY ONE OFF 63 Hz LAST ON OFF Band 2 2.
Default settings OUTPUT REMOTE Item Initial setting Item Initial setting OUTPUT1, OUTPUT2 +4 dBu INPUT1 AV SEL A OUTPUT3 - OUTPUT8 –5 dBu INPUT2 AV SEL B REC OUT1, REC OUT2 –5 dBu INPUT3 AV SEL C HCF OFF INPUT4 AV SEL D EQ OFF INPUT5 AV SEL E DELAY 0 ms MUTING REF LEVEL INPUT6 AV SEL F OFF INPUT7 RECALL 1 GAIN LIMIT +10 dB INPUT8 RECALL 2 OUTPUT FADER 0 dB INPUT9 RECALL 3 Band 1 25 Hz INPUT10 LVL Master A Band 2 40 Hz INPUT11 LVL Master B Band 3 80 Hz INPU
A B C D LINE 4 S VIDEO IN LINE4 COMPONENT /RGB IN F E A B C LINE 4 VIDEO IN LINE 4D, 4E RL/RR/C/W LINE 4A | 4F LINE 3 MIC5/LINE1 MIC6/LINE2 MIC 3,4 ANT a,b MIC 1,2 +48V LINE +48V TUNER SLOT WL1,2 +48V A/D TRIM TRIM TRIM TRIM SIGNAL SIGNAL SIGNAL SIGNAL INPUT SELECTOR A/D A/D A/D RF IND.
Specifications AUDIO INPUT/OUTPUT Input MIC 1/WL 1, MIC 2/WL 2, MIC 3, MIC 4 Terminal shape Circuit Channel Reference input level Maximum input level Impedance –60 to –45 dBu –37 to –22 dBu 2.2 kΩ or more –60 to –45 dBu –37 to –22 dBu 2.
General Power requirement Power consumption Dimensions Mass Operating temperature Storage temperature Supplied accessories Optional accessories AC 120 V, 50/60 Hz 150 W 482 × 132 × 350 mm (w/h/d) (19 × 5 1/4 × 13 7/8 inches) (excluding protrusions) Approx.
Troubleshooting Before contacting us, please check the following again. If the trouble persists, please contact your local Sony Sales office or Dealer. Start the supplied software SRP-X700P Manager and check the settings of the SRP-X700P. Check the following if the problem still cannot be solved. Symptom Power is not turned on. Cause/Remedy • Power cord is disconnected. → Firmly insert the power cord fully into the AC IN terminal and wall outlet. No sound is output. • Input fader is decreased.
