Remote Camera System Guide
Table Of Contents
- Table of Contents
- Read This First
- Chapter 1 Application
- Chapter 2 Connection & Basic Settings
- [A] Auto IP address setting from RM-IP500
- [B] IP address setting from RM-IP Setup Tool
- [C] Serial connection setting (RS-422/RS-232C)
- [D] Connection with 4K video switcher
- [E] Fiber connection from BRC-H900
- [F] Tally control from MCX-500
- [G] Connection with AWS-750
- [H] Connection with RCP-3500/3100/1500 series
- [I] Connection with MSU-1000/3000 series
- [J] NDI® | HX connection
- Chapter 3 Products
- Chapter 4 Edge Analytics Appliance Application
- Edge Analytics Appliance Application Configuration
- Usage example of Handwriting Extraction in the classroom
- Usage example of PTZ Auto Tracking in the lecture hall
- Usage example of Close-up by Gesture in the classroom
- Usage example of Chroma key-less CG Overlay in a small-scale studio
- Usage example of Focus Area Cropping at an event space
- Recommended cameras for connection with Edge Analytics Appliance
- Chapter 5 Appendix
000
Chapter 5: Appendix: Controller compatibility chart
63
RM-IP10
Yes: Supported
–: Not supported
Button/knob Function Conditions BRC-X1000/H800/H900 SRG series
VALUE/R knob Adjustment of priority setting mode values on the camera. Enabled when the brightness adjustment mode is selected with the MODE
button and the VALUE indicator is lit.
Yes Yes
BRIGHT/B knob Adjusts the camera brightness value. Enabled when the brightness adjustment mode is selected with the MODE
button and the BRIGHT indicator is lit.
Yes Yes
FOCUS knob Adjusts the focus. Yes Yes
AUTO/MANUAL button Press this button to select focus mode AUTO or MANUAL. Yes Yes
ONE PUSH AF button Press to activate the one-push auto focus function. This control is enabled when MANUAL is selected with the AUTO/MANUAL
button
Yes Yes
PRESET button Current camera settings are stored in the memory of the camera. Enabled when holding down the PRESET button and pressing one of the
GROUP/POSITION buttons.
Yes Yes
RESET button The memory of the camera is cleared to the factory preset
condition.
Enabled when holding down the RESET button and pressing one of the
GROUP/POSITION buttons.
Yes Yes
BACK LIGHT button Enables the backlight compensation function of the camera. Yes Yes
PAN-TILT RESET button Resets the pan/tilt position of the camera to its initial condition. Yes Yes
ONE PUSH AWB button Activates one-push white balance adjustment. Yes Yes
MENU button Used to display the menu of the camera, return to the main
menu, or turn off the menu.
Enabled when pressing the button for about one second. Yes Yes
Joystick Used for pan/tilt and zoom operations. Yes Yes
POWER button Used to turn the camera ON/OFF. Yes Yes
Used to change the Preset Speed.* Yes –
* See the RM-IP10 operation manual for instructions on how to change the preset speed.
* The SRG-360SHE does not support changing Preset Speed.