Remote Camera System Guide
Table Of Contents
- Table of Contents
- Read This First
- Chapter 1 Application
- Chapter 2 Connection & Basic Settings
- [A] Auto IP address setting from RM-IP500
- [B] IP address setting from RM-IP Setup Tool
- [C] Serial connection setting (RS-422/RS-232C)
- [D] Connection with 4K video switcher
- [E] Fiber connection from BRC-H900
- [F] Tally control from MCX-500
- [G] Connection with AWS-750
- [H] Connection with RCP-3500/3100/1500 series
- [I] Connection with MSU-1000/3000 series
- [J] NDI® | HX connection
- Chapter 3 Products
- Chapter 4 Edge Analytics Appliance Application
- Edge Analytics Appliance Application Configuration
- Usage example of Handwriting Extraction in the classroom
- Usage example of PTZ Auto Tracking in the lecture hall
- Usage example of Close-up by Gesture in the classroom
- Usage example of Chroma key-less CG Overlay in a small-scale studio
- Usage example of Focus Area Cropping at an event space
- Recommended cameras for connection with Edge Analytics Appliance
- Chapter 5 Appendix
000
Chapter 5: Appendix: Controller compatibility chart
62
When using a panel sheet
Control block Button/knob Function Conditions ILME-FR7
FUNCTION menu of
menu control block
ASSIGN 4 to ASSIGN 6 buttons DETAIL LEVEL display – Yes
Adjustment using VALUE knob after DETAIL LEVEL is
displayed
Enabled when DETAIL is set to ON in the camera menu. Yes
KNEE POINT display – Yes
Adjustment using VALUE knob after KNEE POINT is
displayed
Enabled when both KNEE is set to ON and KNEE MODE is set to MANUAL in the camera menu. Yes
Direct menu AE Mode/Level shortcut button Enabled on the shooting screen.
Operate using the VALUE knob.
Yes
Direct menu ND filter shortcut button Enabled on the shooting screen.
Operate using the VALUE knob.
Yes
Audio input level setting – Yes
Camera assignable buttons 1 to 9 – Yes
Lens assignable button FOCUS HOLD – Yes
IRIS button Direct menu IRIS shortcut button Enabled on the shooting screen.
Operate using the VALUE knob.
Yes
ISO/GAIN button Direct menu ISO/Gain/EI shortcut button Enabled on the shooting screen.
Operate using the VALUE knob.
Yes
SHUTTER button Direct menu Shutter shortcut button Enabled on the shooting screen.
Operate using the VALUE knob.
Yes
SHUTTER button (lit blue when
enabled)
Shutter speed display Enabled when the AE button is not lit. Yes
Adjustment using VALUE knob after shutter speed is
displayed
Enabled when the AE button is not lit, and CONFIG >RM SETUP >AE CONFIG is set to MANUAL or
SHUTTER Pri in the camera menu.
Yes
Yes: Supported
–: Not supported