Remote Camera System Guide
Table Of Contents
- Table of Contents
- Read This First
- Chapter 1 Application
- Chapter 2 Connection & Basic Settings
- [A] Auto IP address setting from RM-IP500
- [B] IP address setting from RM-IP Setup Tool
- [C] Serial connection setting (RS-422/RS-232C)
- [D] Connection with 4K video switcher
- [E] Fiber connection from BRC-H900
- [F] Tally control from MCX-500
- [G] Connection with AWS-750
- [H] Connection with RCP-3500/3100/1500 series
- [I] Connection with MSU-1000/3000 series
- [J] NDI® | HX connection
- Chapter 3 Products
- Chapter 4 Edge Analytics Appliance Application
- Edge Analytics Appliance Application Configuration
- Usage example of Handwriting Extraction in the classroom
- Usage example of PTZ Auto Tracking in the lecture hall
- Usage example of Close-up by Gesture in the classroom
- Usage example of Chroma key-less CG Overlay in a small-scale studio
- Usage example of Focus Area Cropping at an event space
- Recommended cameras for connection with Edge Analytics Appliance
- Chapter 5 Appendix
000
Chapter 5: Appendix: Controller compatibility chart
59
Controller compatibility chart
RM-IP500
Yes: Supported
–: Not supported
Control block Button/knob Function Conditions BRC-X1000/H800/X400 BRC-H900 SRG series
*1 *2
Lens control block AE button Exposure mode selection When the button is on (lit): Full auto.
When the button is off (not lit): Follows CONFIG
>RM SETUP >AE CONFIG setting in the RM menu.
Yes Yes Yes
FOCUS adjustment knob Manual focus adjustment Enabled when the AUTO FOCUS mode button is not
lit.
Yes Yes Yes
O.P.AF (one-push auto focus)
button
One-push auto focus adjustment Enabled when the AUTO FOCUS mode button is not
lit.
Yes Yes Yes
IRIS knob Iris setting adjustment Enabled when the AE button is not lit, and CONFIG
>RM SETUP >AE CONFIG is set to MANUAL or IRIS Pri
in the RM menu.
Yes Yes Yes
Color adjustment block O.P.AWB (one-push auto white
balance) button
One-push white balance auto adjustment Enabled when OPERATION >WHITE >WB MODE is
set to ONE PUSH in the RM menu.
Yes Yes Yes
O.P.ABB (one-push auto black
balance) button
One-push black balance auto adjustment Enabled when OPERATION >BLACK >ABB MODE is
set to ON in the RM menu.
– Yes –
BARS button Toggle color bars output on/off. – Yes Yes –
ASSIGN 1 to ASSIGN 3 buttons Toggle backlight compensation on/off. Enabled when the AE button is lit. Yes Yes
*3
Yes
Toggle flicker compensation on/off. – Yes Yes –
Display the status of the iris, gain, shutter
speed, and zoom position.
– Yes Yes Yes
Toggle Clear Image Zoom on/off. – Yes – Yes
*10
Toggle Tele convert on/off. – Yes – –
Preset mode (MOD1-TRCE and MOD2-
TRCE) switching
– Yes – –
Toggle PTZ auto framing on/off – – – Yes
*11
R-WHITE knob/B-WHITE knob R gain and B gain adjustment Enabled when OPERATION >WHITE >WB MODE is
set to MANUAL in the RM menu.
Yes Yes Yes
R-BLACK knob/B-BLACK knob R black and B black adjustment Enabled when OPERATION >BLACK >ABB MODE is
set to OFF in the RM menu.
– Yes –
MASTER BLACK knob Master black adjustment – Yes –
*4
–