Remote Camera System Guide
Table Of Contents
- Table of Contents
- Read This First
- Chapter 1 Application
- Chapter 2 Connection & Basic Settings
- [A] Auto IP address setting from RM-IP500
- [B] IP address setting from RM-IP Setup Tool
- [C] Serial connection setting (RS-422/RS-232C)
- [D] Connection with 4K video switcher
- [E] Fiber connection from BRC-H900
- [F] Tally control from MCX-500
- [G] Connection with AWS-750
- [H] Connection with RCP-3500/3100/1500 series
- [I] Connection with MSU-1000/3000 series
- [J] NDI® | HX connection
- Chapter 3 Products
- Chapter 4 Edge Analytics Appliance Application
- Edge Analytics Appliance Application Configuration
- Usage example of Handwriting Extraction in the classroom
- Usage example of PTZ Auto Tracking in the lecture hall
- Usage example of Close-up by Gesture in the classroom
- Usage example of Chroma key-less CG Overlay in a small-scale studio
- Usage example of Focus Area Cropping at an event space
- Recommended cameras for connection with Edge Analytics Appliance
- Chapter 5 Appendix
Chapter 3: Products: System cameras
00045
System cameras
HXC-FB80/HXCU-FB80
3G transmission capable HD portable camera and camera control unit
Signals can be transmitted up to a distance of 600m when connected to camera control unit
HXCU-FB80 via a hybrid type optical fiber cable.
3G transmission is supported for two signals (1080/59.94p signals and 1080/59.94i signals) which
can be simultaneously transmitted.
HD trunk and HD prompters can also be used for transmitting HD footage separately from camera
footage.
1080/29.97PsF and 23.98PsF formats are supported for use in various HD live production such as
studios, sports, and live events. It is also possible to scale up to 3840×2160/59.94p output from the
camera control unit.
12G SDI output is also supported for 4K video output from a single coaxial cable.
Supports HD HDR shooting to capture footage which is close to what the human eye captures
under conditions where shooting objects have big differences in lighting between bright and dark
areas, such as in an outdoor sports broadcasting and nighttime shooting.
The connector that links the camera and camera control unit is compatible with both hybrid type
optical fiber cables and single mode fiber cables. These options make it possible to create a flexible
system.
The three model lineup consists of the HXC-FB80H with the camera body only, the HXC-FB80K
which includes a lens and viewfinder set, and the HXC-FB80S which includes a large viewfinder for
studio use. These options make it possible to select the optimal model for your needs.
HXC-FB80H: Camera body only
HXC-FB80K: Camera body, 20x zoom lens, 3.5-type LCD viewfinder, microphone
HXC-FB80S: Camera body, 20x zoom lens, 7-type LCD viewfinder
HXC-P70H
Multipurpose camera
Equipped with three 2/3-type CMOS sensors, this model features F12 high sensitivity and 60dB high
S/N, etc. for high image quality. It also automatically adjusts the iris, gain and shutter to adapt to
ambient brightness, making it useful not only as a studio camera, but also as a weather camera and
for monitoring purposes.
At a width of 86mm and weight of approximately 1.5kg, it is compact and lightweight, offering
flexible installation in high locations and small spaces. It also has a low power consumption of
approximately 17W.
It contains a built-in filter servo that is used to remotely operate the ND filter position.
In addition to the maximum 64 frame accumulation slow shutter function, the camera gain can be
increased to +48 dB for shooting in low light conditions.
This model supports 1080/59.94i, 50i, 29.97PsF, 25PsF, 720/59.94p and 50p.
Equipped with a 2x and 4x digital extender function so there is no sensitivity falloff due to electrical
processing.
Not only can the camera be used on its own, but it can be used with camera control unit HXCU-
FB80 in a system configuration.
Transmission is possible up to a distance of 1 km when using a hybrid type optical fiber cable and
up to 10km when using a single mode fiber cable.
Lens sold separately.