Remote Camera System Guide
Table Of Contents
- Table of Contents
- Read This First
- Chapter 1 Application
- Chapter 2 Connection & Basic Settings
- [A] Auto IP address setting from RM-IP500
- [B] IP address setting from RM-IP Setup Tool
- [C] Serial connection setting (RS-422/RS-232C)
- [D] Connection with 4K video switcher
- [E] Fiber connection from BRC-H900
- [F] Tally control from MCX-500
- [G] Connection with AWS-750
- [H] Connection with RCP-3500/3100/1500 series
- [I] Connection with MSU-1000/3000 series
- [J] NDI® | HX connection
- Chapter 3 Products
- Chapter 4 Edge Analytics Appliance Application
- Edge Analytics Appliance Application Configuration
- Usage example of Handwriting Extraction in the classroom
- Usage example of PTZ Auto Tracking in the lecture hall
- Usage example of Close-up by Gesture in the classroom
- Usage example of Chroma key-less CG Overlay in a small-scale studio
- Usage example of Focus Area Cropping at an event space
- Recommended cameras for connection with Edge Analytics Appliance
- Chapter 5 Appendix
Chapter 3: Products: Remote cameras
00041
BRC-X1000/BRC-H800
1.0-type Exmor R CMOS 4K/HD
remote camera
This camera features a 1.0-type Exmor R
CMOS sensor and optical 12x zoom lens on
an integrated swivel base.
BRC-X1000 supports the 4K format.
It comes with two SDI outputs and one HDMI
output as standard equipment.
A silent design enables unobtrusive
operation sounds even at a maximum speed
of 60°/s for smooth swivel operation.
Clear Image Zoom enables 18x zoom
at 4K and 24x zoom at HD. Tele Convert
Mode enables a maximum equivalent of
48x telephoto zoom performance when
shooting in HD.
PoE+ (IEEE802.3at) support enables power
supply via a network cable.
See below for examples of applications
where this product is used.
- Small Studios (page 5)
- Reality Shows (page 6)
- Houses of Worship (page 7)
- Event Production (page 9)
- Virtual Studio (page 15)
BRC-H900
Discontinued
1/2-type Exmor 3 CMOS HD remote
camera
This camera features a 1/2-type Exmor CMOS
sensor and optical 14x zoom lens on an
integrated swivel base.
It comes with one SDI output as standard
equipment. Using the option card (sold
separately) enables a variety of output
options including optical fiber.
A silent design enables unobtrusive
operation sounds even at a maximum speed
of 60°/s for smooth swivel operation.
See below for examples of applications
where this product is used.
- Live Sports Events (page 11)
BRC-X400
NDI® | HX capable 1/2.5-type Exmor R CMOS-equipped IP 4K remote camera
This video camera features a 1/2.5-type Exmor R CMOS 4K image sensor and integrated swivel base.
It supports 4K format.
It comes with an SDI/HDMI/IP output as standard equipment.
Clear Image Zoom enables 30x zoom when shooting in 4K and 40x zoom when shooting in HD. Tele
Convert Mode enables a maximum equivalent of 80x telephoto zoom performance when shooting
in HD.
This single camera covers a shooting range from wide angle (approx. 70°) to telephoto.
PoE+ (IEEE802.3at) support enables power supply via a network cable.
It is NDI® | HX capable and can be used to build live system with NDI® compatible devices.
Equipped with Genlock and a tally light.
Audio input to the audio input connector can be superimposed on the IP output for transmission.
See below for examples of applications where this product is used.
- Reality Shows (page 6)
- Houses of Worship (page 7)
- Event Production (page 9)
- Radio Booth (page 13)
- E-sports (page 14)