Remote Camera System Guide

000
Chapter 2: Connection & Basic Settings: NDI® | HX connection
38
NDI® | HX connection
Devices
Remote camera with
interchangeable lens
ILME-FR7
Remote camera BRC-X400, SRG-A40, SRG-A12, SRG-X400, SRG-X120, SRG-XB25, SRG-XP1
What you can do
Connect to an NDI® compatible product to transfer camera footage or audio input to the camera and to
control the camera.
Setup instructions
1. Purchase a license on the NewTek website.
https://www.newtek.com/ndihx/products/upgrade/
2. Download the NDI Tool from the NewTek website and install it on your computer.
3. Enable access to the camera from a web browser.
For details, refer to the Operating Instructions of the camera.
4. Connect the computer and camera to an external network via a LAN cable, launch the NDI Tool,
and attach the license to the camera.
5. See the NewTek website for details on how to configure connection settings.
BRC-X400
BRC-X400
Microphone
Microphone
HXC-FB80
Remote control signal: Network cable (Cat 5e or higher)
Video signal: Connecting cable with BNC connector
Audio signal: Microphone cable
Signal flow
TriCaster®
Switching hub Router