Remote Camera System Guide

000
Chapter 2: Connection & Basic Settings: Connection with 4K video switcher
26
Connection with 4K video switcher
Set to desired video
output format
Devices
Remote camera with
interchangeable lens
ILME-FR7
Remote camera BRC-X1000, BRC-X400*, SRG-A40, SRG-A12, SRG-X400*, SRG-X120*
* SRGL-4K 4K License is required.
Other Commercially available 4K 29.97p compatible video switchers, video
format converters
What you can do
On the BRC-X1000, SRG-A40, and SRG-A12, 29.97p/25p/23.98p video can be input to a video switcher.
On the ILME-FR7, 29.97p/25p/23.98p/24p/50p/59.94p video can be input to a video switcher.
Setup instructions
Connect the devices using the diagram on the upper left as a reference, then turn them on.
Precautions
The BRC-X1000 SDI image output is Dual link 3G-SDI (2SI). Use a commercially available video format
converter to match it to your video switcher input format.
You can set the video output method (video format) for output from the HDMI OUT/SDI OUT
connector as shown in the diagram on the lower left. Refer to the operating instructions of each
camera for compatible formats.
BRC-X1000
Video format
converter
4K video
switcher
Video signal: Connecting cable with BNC connector
Signal flow