Remote Camera System Guide
Table Of Contents
- Table of Contents
- Read This First
- Chapter 1 Application
- Chapter 2 Connection & Basic Settings
- [A] Auto IP address setting from RM-IP500
- [B] IP address setting from RM-IP Setup Tool
- [C] Serial connection setting (RS-422/RS-232C)
- [D] Connection with 4K video switcher
- [E] Fiber connection from BRC-H900
- [F] Tally control from MCX-500
- [G] Connection with AWS-750
- [H] Connection with RCP-3500/3100/1500 series
- [I] Connection with MSU-1000/3000 series
- [J] NDI® | HX connection
- Chapter 3 Products
- Chapter 4 Edge Analytics Appliance Application
- Edge Analytics Appliance Application Configuration
- Usage example of Handwriting Extraction in the classroom
- Usage example of PTZ Auto Tracking in the lecture hall
- Usage example of Close-up by Gesture in the classroom
- Usage example of Chroma key-less CG Overlay in a small-scale studio
- Usage example of Focus Area Cropping at an event space
- Recommended cameras for connection with Edge Analytics Appliance
- Chapter 5 Appendix
000
Chapter 1: Application: Parliament/Congress
10
Parliament/Congress
Usage
Connecting remote cameras to the existing parliament/congress system enables
broadcasting while switching between video and audio using simple operations even
with minimal staff.
User benefits
A smart design ensures that the cameras will not interfere with the interior design of the parliament
building, nor will they interfere with the speakers, enabling realistic recording of parliament member
expressions and the atmosphere of the parliament.
Preset functions can be used to set shooting locations such as the chairperson's seat, the podium, and
parliament members’ seats which can be smoothly cycled through according to the progress of the
parliament session.
Combined with the existing system at the parliament, the camera can automatically capture each
speaker when the microphone speech button is linked with the preset function.
You can prevent a moving image from being displayed when panning, tilting, zooming, or focusing
from one subject to another by using the Picture Freeze Preset function to output a still image while
the camera is moving. This function allows you to switch images smoothly as if you were capturing the
subject using multiple cameras. It enables preset operation that does not result in an unnatural image
even when using a single camera (excluding the SRG-XB25).
SRG-A40 can track a person automatically and keep comfortable composition of the image. This realizes
natural and smooth video shooting automatically (PTZ Auto Framing function).
SRG-A40, SRG-X400
Video switcherSwitching hub
Parliament system
SRG-A40, SRG-X400
SRG-XB25
Microphone
Assembly
LAN
SDI/HDMI
Audio
Setup and basic settings
See below for information on connection and basic settings of devices shown in the system
configuration example on the left.
: Auto IP address setting from RM-IP500 (page 19)
: IP address setting from RM-IP Setup Tool (page 21)
See the operation manual of each device for connection information not mentioned above.
RM-IP500