User Manual

SYSTEM Setup Menu
46
Chapter 5 Menu Details
KEYMAP
Settings of keymap
EJECT
EJECT button function
DIS [Disable]: Disables the button function.
ENA [Enable]: Enables the button function.
STOP
STOP button function
PLAY
PLAY button function
REC
REC button function
REW
REW button function
FFWD
FFWD button function
PAUS E
PAUSE button function
KEY INHI
Settings to inhibit button operation
ALL [ALL]: Locks all.
MAP [MAP]: Locks only the buttons that are set to
“Disable” in the KEYMAP settings.
REC INHI
Settings of recording inhibit mode
OFF [Off]: Does not prohibit recording.
ON [On]: Prohibits recording.
POWER
Settings to reduce
power consumption
LED Controls the POWER indicator.
ON [On]: Lit normally
LOW [Low]: Dimly lit
OFF [Off]: Not lit
TALLY Controls the tally lamp.
ON [On]: Lit normally
LOW [Low]: Dimly lit
OFF [Off]: Not lit
BATTERY
Settings related to the
remaining battery
power indication
DCIN TYPE Selects the type of battery to be connected to the F65.
AC [AC Adapter]: AC adapter
Li-ion [Li-ion Battery]: Lithium ion battery
BP-GL [BP-GL Battery]: BP-GL95
OTH1 [Other 1]
OTH2 [Other 2]
Near END
(DCIN)
Sets the threshold voltage at which to show a near-end
(almost exhausted)/warning indication for the battery
selected for the previous item “DCIN TYPE.”
11.0 to 15.0 (11.9 V)
END (DCIN) Sets the threshold voltage at which to show an end
(exhausted)/warning indication for the battery selected for
the item “DCIN TYPE.”
11.0 to 12.0 (11.0 V)
Setting Item Settings