User Manual

Connect F65

Chapter 2 Preparation

The unit mounts onto the rear of the F65.

Tips

• When mounting the unit, first mount the F65 on

a tripod and secure it such that it does not move.

For details of mounting on a tripod, refer to the

Operation Manual for the F65.

• When mounting the unit, do so in an

environment relatively free from dust, etc.

1 Remove the connector cap from the

CAMERA connector of the unit.

Tip

Store the connector cap in a safe location so that you

do not lose it.

2 Align and connect the CAMERA

connector of the unit with the F65

connector.

1 Align the base of the unit with the base

of the F65 as shown in the diagram.

2 Align the CAMERA connector of the

unit with the F65 dock connector, and

push the unit down.

Connect F65

First, join as shown.

Couple the unit in the orientation shown.