User Manual

46
Detailed Menu Description
Chapter 5 Menu Items
VIDEO Menu
The VIDEO menu allows you to adjust video signals.
Button Indication Setting Target
[F1] MASTER Simultaneously adjusts the Y, PB, and PR levels of the HD video signal output via
the SD/HD SDI OUT connectors. (see page 40)
0.0 to 100% (4000H)
to 141.3% (5A70H)
Out
[F2] Y Adjusts the Y level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
0.0 to 100% (4000H)
to 141.3% (5A70H)
Out
[F3] PB Adjusts the Pb level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
0.0 to 100% (4000H)
to 141.3% (5A70H)
Out
[F4] PR Adjusts the Pr level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
0.0 to 100% (4000H)
to 141.3% (5A70H)
Out
[F5] SETUP Adjusts the setup level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
–10% to 0.0% to 10.0%
Out
[F6] BLK LV Adjusts the black level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
–31.0% to 0%
to 31.0%
Out
[F7] CRM PH Adjusts the chroma phase of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
–127 to 0
to 127
Out
[F8] SYNC PHASE Adjusts the sync phase of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
Out
[F8] SYNC Roughly adjusts the sync phase.
–128 to 0
to 127
Out
[F9] FINE Finely adjusts the sync phase.
0
to 1024
Out
[F10] EXIT Redisplays the previous menu. –
[F10] INT SG Sets the type of signal output from the internal signal generator.
Off
CB100
CB75
SMPTE
ARIB
MB1
MB2
10STEP
PBAR
RAMP
Black
In
ALT/[F1] OUT BLNK Turns on or off vertical interval blanking processing of the HD video signals output
via the SD/HD SDI OUT connectors.
Through
: Does not perform blanking processing.
Blank: Performs blanking processing.
Out
ALT/[F3] YADD Sets whether to forcibly turn off Y add.
Auto
Off
Out
ALT/[F5] A/B DISP Sets whether to display the video for the left or right when displaying 3D video
signals on the display.
Link-A
Link-B
MONI: (Only available for the output ports)
I/O
ALT/[F6] VPID SEL Selects VPID to be multiplexed with the HD SDI output in 3D mode.
Dual
: Uses as two separate sets of signals.
3D: Uses as 3D signals.
Out