Model No. Número de modelo Scan, watch and discover how to get the most out of your TV Escanee, observe y descubra como obtener el máximo de su TV TC-L32E5 TC-L37E5 TC-L42E5 TC-L47E5 http://rd.pnaqr.com/TC-L00E5/2/1/ Owner’s Manual 32” / 37” / 42” / 46.9” Class 1080p LCD HDTV (32.0/37.0/42.0/46.9 inches measured diagonally) Manual de usuario Televisión de alta definición de 1080p y clase 32” / 37” / 42” / 46.9” de LCD (32,0/37,0/42,0/46,9 pulgadas medidas diagonalmente) For assistance (U.S.A.
This product incorporates the following software or technology: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software based in part on the work of the Independent JPEG Group, (4) the software developed by the FreeType Project, (5) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or, (6) open sourced software other than the software licensed under the LGPL.
VIERA Link™ is a trademark of Panasonic Corporation. HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Contents Please read before using the unit SDXC Logo is a trademark of SD3C, LLC. DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. Manufactured under license from Dolby Laboratories.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
19) An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 20) Unplug this LCD TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a.
FCC and IC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CEA CHILD SAFETY NOTICES WARNING Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death. The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe.
Accessories/Optional Accessory Accessories Check you have all the items shown. Accessories Remote Control Transmitter • N2QAYB000779 Batteries for the Remote Control Transmitter (2) • Pedestal Power cord • AA Battery TC-L32E5, TC-L37E5, TC-L42E5 • TC-L47E5 How to assemble (p. 9) Owner’s Manual Quick Start Guide Child safety Product Registration Card (U.S.A.
Attaching the pedestal to TV ■Assembling the pedestal •• Fix securely with assembly screws A . (Total 4 screws) Tighten screws firmly. A Accessories Assembly screws (4 of each) A XSS5+15FNK size (M5 × 15) Make sure that the bracket is anchored before fixing the screws.
Installing the remote’s batteries Close Pull open Hook • Note the correct polarity (+ or -). • Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. not mix old and new batteries. • Do not mix different battery types (such as • Do alkaline and manganese batteries). use rechargeable (Ni-Cd) batteries. •DoDonotnotburn or break batteries. Power cord connection Insert the power cord plug (included) firmly into place.
Connections Connection Panels Back of the TV SD card slot (p. 26) Getting started USB 1/2 terminal (p. 26) •• A PC terminal DIGITAL AUDIO OUT Connections Accessories/Optional Accessory Ethernet connector A B C ● For A , B , C connections, please refer to p. 12 Antenna or Cable connection Back of the TV VHF/UHF Antenna Power Cord (Connect after all the other connections have been made.
AV cable connection Best A To use HDMI terminals HDMI AV OUT AV Equipment e.g. Blu-ray Disc player DVI OUT HDMI-DVI Conversion cable (not in use) e.g. Blu-ray Disc player L white white white white R red red red AV Equipment AUDIO OUT red Component/AV adapter B To use COMPONENT terminals Good Y green/ yellow green blue blue green green PB COMPONENT VIDEO OUT blue blue AV Equipment PR Component/AV adapter red red red red L white red AUDIO white white OUT R white e.g.
Audio connection Audio equipment Optical cable DIGITAL AUDIO IN e.g.
Identifying Controls TV controls/indicators Front of the TV Back of the TV Changes the input mode Chooses menu and submenu entries (Press and hold down for MENU function) Selects channels in sequence Volume up/down Power indicator (on: red, off: no light) C.A.T.S (Contrast Automatic Tracking System) POWER button Remote control sensor within about 23 feet (7 meters) in front of the TV set •• • An image of the control panel is Note displayed on the screen while using it.
First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 53) is set to “No”.
ANT/Cable setup Do you use a Cable, Satellite or Fiber Optic box with this TV? ANT/Cable setup Step 4 of 7 EXIT Do you use a Cable, Satellite or Fiber Optic box with this TV? Yes No OK Select OK Yes RETURN RETURN b Select connection type for Cable or Satellite box and go to (Input labels) No a Select signal type (Cable/Antenna) ANT/Cable setup Step 4 of 7 ANT/Cable setup How does the TV receive its programming content? Cable service (No box) Step 4 of 7 Which wiring method is used to conne
Label the inputs for easy identification (Label inputs) To name each input, follow the instructions on screen. When done, select NEXT and press OK to go to the next step. EXIT Label inputs select Step 5 of 7 What is connected to HDMI 1 ? For your convenience, you may name each input for easy identification. The labels will be shown in the “Input select” menu.
Adjust the Clock (Set clock) When done, select NEXT and press OK to go to the next step. ■ Manual setting EXIT Set clock Manual ------- - --- Mode Year Month Day Hour Minute Time zone DST Next OK Edit Select Change DST Minutes select Step 7 of 7 Adjust the TV's date and time OK set or OK 10 0 9 RETURN 0 - 9 Follow the instructions on screen to complete the following operations.
■ About wireless LAN ● Wireless LAN adapter and Access point need to be obtained separately. select Wireless network Please choose connection method: Search for wireless networks OK OK WPS (Wi-Fi Protected Setup using push button) ● Follow the directions on screen to complete the setting. ● See page 39 for more information.
Watching TV Turn power on POWER CC (Remote) SAP (TV) POWER INPUT • or Note Please select correct input INPUT (p. 25) Select a channel number OK OPTION up CH G or down @ ABC DEF GHI JKL MNO PQRS TUV WXYZ , • You can also press the CH up/down button on the TV (p. 14) CH FORMAT INFO FAVORITE ■ To directly enter the digital channel number When tuning to a digital channel, press the button to enter the minor number in a compound channel number.
■ Other Useful Functions Listen with SAP (Secondary Audio Programming) ■ Select the Audio mode for watching TV SAP Digital mode Press SAP to select next Audio track (if available) when receiving a digital channel. Audio track 1 of 2 (English) Analog mode Press SAP to select the desired Audio mode. • Each press of SAP will change the Audio mode. (Stereo/SAP/Mono) •• Closed Caption SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
Display the SUB MENU ■ Press OPTION to show the Sub Menu screen This menu consists of shortcuts to convenient functions. Sub menu is only available when the TV is using the Antenna/Cable input, not when using Cable or Satellite box. OPTION Setup SUB MENU Specify favorites or type of channels to view when pressing the channel up/ down button. Set favorite channel (below) Edit the channel identifier (p. 47) Check the signal strength (p.
■ Other Useful operations Entering characters You can use the remote control keys to enter the alphanumeric characters. ■ Switches input mode G Menu ABC → abc → 123 ↑_____________| 3LFWXUH 3UR[\ VHWWLQJ 3UR[\ DGGUHVV 1 4 8 $XGLR Proxy port 0 /RFN Setup ■ Press each number key OK to cycle through the alphanumeric character 6HOHFW RETURN $%& ĺ DEF 1 @.
Using VIERA TOOLS VIERA TOOLS is the easy way to access the TV’s special features. They are displayed as shortcut icons on the TV screen. Display VIERA TOOLS TOOLS ERA VI EXIT OK TOOLS ERA VI Select the item ● The icons displayed differ depending on your country or area you select. (p. 15) RETURN OK select next (example) Set each item • Media player Media player (p. 26-31) • DLNA Using DLNA feature (p. 44) • VIERA Link VIERA Link (p. 36-37) • Game mode Change to “Game” mode.
Watching content from external devices With the connected equipment turned On Display the Input select menu INPUT INPUT Select the input mode Input select OK R G @ ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 ANT/Cable In 2 HDMI 1 3 HDMI 2 , 4 HDMI 3 or 5 HDMI 4 6 Video 7 GAME select Comp. OK PC enter (shortcut) press the corresponding NUMBER button on the remote control to select the input of your choice. Or, press the INPUT button repeatedly to cycle through the available inputs.
Using Media player You can view still and motion images and play music saved on a USB flash memory and an SD card.
Viewing Contents Insert a Media (SD card or USB flash memory) • Auto play setting Image viewer auto play (p.
Photos view [Photos thumbnail] Media Player [Features] Photos Select OPTION Slideshow All photos SD memory card OK Info RETURN Sort Drive select • • • • R Slideshow setting G Sort B Drive select Y Media select Media select [Photos playback screen] ● To display/hide Photo status INFO Guide and Banner Single view Slideshow Single view Navigation Guide Slideshow Single view Rotate Prev. Rotate Prev. Next RETURN Next RETURN OK Prev.
Slideshow Display “Slideshow settings” Adjust items and select “Slideshow start” Media Player settings Photo Slideshow All photos Start Slideshow Frame Off Photo effect Off Transition effect Normal Burst playback Off Display interval Normal Repeat playback On Select RETURN Select RETURN Sort Off Photo effect Off Transition effect Off OK OK Normal Burst playback Off Display interval Normal Repeat playback On ● To stop in mid-cycle SD memory card OK OPTION Slideshow Frame
Videos view [Videos thumbnail] Media Player [Features] Videos • • • • Titles/Folders view Trip1 Trip2 Trip3 Trip4 Trip5 Room Nature1 Nature2 Nature3 Nature4 Nature5 Nature6 2009_4 2009_7 2009_9 Select OPTION SD memory card OK Info RETURN Play Drive select R Play B Drive select Y Media select FORMAT Aspect change Media select [Videos playback screen] SD 01/04/2010 15:34 Movie banner 00:00.10 00:00.03 Drive type (SD/USB/DLNA) SD 01/04/2010 15:34 00:00.10 00:00.
Music view [Music thumbnail] Media Player My Music_1 [Features] Music My Music_2 Select OPTION Play Folder Folders My Music_3 • • • R Play folder B Drive select Y Media select SD memory card OK Info RETURN Drive select Media select [Music playback screen] Navigation area AAAAAA BBBBBBB XXXXXXX OK RETURN 00:00.05 / 00:00.49 RETURN Elapsed time of current song * Counter may not work correctly with DLNA feature. In this case “--:--:--”is displayed.
VIERA LinkTM “HDAVI ControlTM” Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote. Enjoy additional HDMI Inter-Operability with compatible Panasonic products. This TV supports “HDAVI Control 5” function. Connections to equipment (Blu-ray Disc player, DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables enables VIERA Link controls.
VIERA Link™ Connections (with VIERA Link function) ■ Terminal overview Back of the TV • VIERA LinkTM “HDAVI ControlTM” ■ Connecting Blu-ray Disc player/DVD Recorder (DIGA) HDMI cable Blu-ray Disc player/DVD recorder (DIGA) with VIERA Link function ■ Connecting Home theater system/AV amp HDMI 1 is recommended.
VIERA Link settings and Available features To use all VIERA Link functions: After everything is connected, in VIERA Link settings menu, set “VIERA Link” to “On”. Some features are disabled depending on the “HDAVI Control” version of the equipment. Please check the list (p.
Automatic Input Switching When using a Blu-ray Disc player, DVD player/recorder or Home theater system, the TV will automatically change to the appropriate input, when playback begins on one of those devices. • For a Home theater system the speakers automatically switch to the theater system. Power on link Yes: The TV is turned on automatically and switches to the appropriate HDMI input whenever VIERA Link compatible equipment is initially turned on and the Play mode is selected.
VIERA Link menu and Available features Some features are disabled depending on the “HDAVI Control” version of the equipment. Please check the list (p. 32) Display the VIERA Link menu CC SAP EXIT This function is not available depending on your country or area you select. (p.
Speaker control You can select the Home theater or TV speakers for audio output. Control the theater speakers with the TV remote control. This function is available only when a Panasonic Amplifier or Player theater is connected. select OK Recorder Volume up / down VOL MUTE Mute Select “Speaker output” Select “Home theater” or “TV” VIERA Link control ■ Home theater: Adjustment for the equipment change sound of the TV is muted. • The the equipment is turned off, the TV speakers • When take over.
Using Network services Available Network service and features ■ Using EASY IPTV p. 43 ■ Using DLNA feature (Home network) p. 44 This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org. It allows you to share photos, videos and music stored in the DMS (for example, PC with Windows 7 installed, etc.
Network Connections Contact your Broadband service provider NOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service at no less than the following connection speed. If you already have such service, make sure that the connection speed exceeds the following. ● Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively. ● Dial-up Internet service cannot be used for EASY IPTV.
Network settings This is a setting for connecting to a broadband environment.
IP address/DNS settings ■ Manual setting Select “IP/DNS setting mode” and set to “Automatic” Select “IP/DNS setting mode” and set to “Manual” Select the item and press OK Check the specifications of the broadband router and enter each IP address. Or Enter each IP address as was specified by the provider (When IP/DNS automatic acquisition in DHCP can be used) Menu select IP address/DNS settings IP setting mode Picture Automatic IP address Audio Network 192.168.0.5 Subnet mask 255.255.255.
Online Movies settings Select “Online Movies settings” Menu Picture Network Connection test Network connection Wireless (WiFi) Audio Wireless network settings IP address/DNS settings Network Timer Lock select Select item and set to “Off” (Available services are displayed.) The items are not displayed on Online Movies screen.
Using EASY IPTV This function allows you to access VOD (Video-on-demand) services, easily with selecting the icon. ● You need broadband environment to use this service. Preparations ● Network connections (p. 39) ● Network settings (p. 40-42) EXIT Display the Online Movies screen RETURN Select the item and press OK MEN U RN INTE ET OK select • OK Using Network services view (example) Depending on the usage conditions, it may take a while to read all the data.
Using DLNA feature You can share the contents (Photo, Video, Music, etc.) stored in DLNA Certified media server with your home network system. Preparations EXIT ● Network connections (p. 39) ● Network settings (p. 40-42) Display VIERA TOOLS TOOLS ERA VI OK OPTION TOOLS ERA VI RETURN Select the “DLNA” R OK select next INFO (example) Select server Display available server.
Network Camera You can operate the Network camera from the TV remote and also check the images from the Network camera on your TV. ● VIERA Link control only with the TV’s remote control (p. 37) Preparations EXIT ● Network connections (p. 39) ● Network settings (p.
Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions.
Manual program (Set manually) Use this procedure when changing the channel setup or changing the channel display. Also, use this to add or skip channels from the channel list manually. You can select a channel tuning mode (Digital only/ Analog only) in “Channel surf mode” (p. 52) Edit ● Caption Edit CH caption Channel 80-101 @ D---A Caption Select “Edit” OK @ ABC DEF GHI JKL MNO PQRS TUV WXYZ set OK Select or change , RETURN Manual program Edit Apply 3 4 5 Favorite Add ... Yes ..
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. Display the menu MEN U ● Shows the functions that can be adjusted. ● Some functions will be disabled depending on the type of input signal. EXIT MEN U Menu structure Menu Reset to defaults Picture RETURN Menu bar Press OK to move to the Menu items.
● “Reset to defaults” will be grayed out if no changes are made in the following menus: “Picture”, “PC adjustments”, “Audio” and “Closed caption”. Picture settings Adjust the image or picture quality Settings Items Reset to defaults Picture mode Vivid Standard Cinema Custom (Photo) Item Description Resets all picture adjustments to factory default settings except for “Advanced picture”. Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
Settings HDMI settings Items Item Description HDMI/DVI RGB Auto/ range (HDMI 1-4) Standard (16-235)/ Nonstandard Contents type (HDMI 1-4) Off/Auto/Photo/ Graphics Prevents the blown out highlights and blocked up shadows when a wide-range signal is received. Selects between standard RGB range (16-235 bits) or non-compliance (0-255 bits). Auto: Switches the RGB range (Standard (16-235)/Nonstandard) depending on the HDMI signal information. Sets content type to each HDMI input.
Network settings Configure Network settings Settings Connection test Network connection Wireless network settings IP address/DNS settings Network link Online Movies settings Software update New software notice Network status See p. 40-42 for more detail. The TV can automatically turn On/Off at the designated date and time.
Setup Settings Channel surf mode Language Clock ANT/Cable setup Input labels (Display labels of connected devices) Closed caption • The settings in “Analog” or “Digital” depend on the broadcaster. Other function settings Items All/Favorite/ Digital only/ Analog only English/ Español/ Français Item Description Sets the mode to select the channel with the Channel up/down button. Favorite: Only channels registered as FAVORITE. (p. 22) Selects the screen menu language. Adjusts the clock. (p. 18) See p.
Settings Keyboard type Items Item Description Select keyboard type. Operate USB keyboard (p. 23) (U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin America)/Spanish (Spain)) Advanced setup Auto power on (No/Yes) Image viewer auto play First time setup About Reset to defaults Turns TV On automatically when the cable box or connected device is turned On. TV AC cord must be plugged into this device. TV turns on every time the power is restored.
Ratings List for parental control “V-chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. ■ U.S. MOVIE RATINGS (MPAA) NR G PG PG-13 R NC-17 X NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or where rating does not apply. GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTS STRONGLY CAUTIONED.
Technical Information Aspect Ratio (FORMAT) Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format of the received signal and your preference. (p. 21) (e.g.: in case of 4:3 image) FULL JUST • • FULL JUST Enlarges the 4:3 image horizontally to the screen’s side edges. Stretches to justify the 4:3 image to the four corners of the (Recommended for anamorphic picture) screen.
Data format information ● Compatible Data format for Media player (SD card/USB flash memory)/DLNA p. 30 DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard EXIF: Exchangeable Image File Format Note ● Format the card with the recording equipment. ● The picture may not appear correctly on this TV depending on the recording equipment used. ● Display may take some time when there are many files and folders.
VIERA LinkTM “HDAVI ControlTM” HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 33) ● This function may not work normally depending on the equipment condition. ● The equipment can be operated by other remote controls with this function on even if the TV is in Standby mode. ● Image or sound may not be available for the first few seconds when playback starts. ● Image or sound may not be available for the first few seconds when input mode is switched.
PC Input Terminals ● Signal Names for D-sub 15P Connector Pin No. 11 12 13 14 15 6 7 1 9 10 8 2 3 4 5 Pin Layout for PC Input Terminal Signal Name R G B NC (not connected) GND (Ground) Pin No. Signal Name GND (Ground) GND (Ground) GND (Ground) NC (not connected) GND (Ground) Pin No.
Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. ● If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted by 100 times the amount of water) and then wring the cloth to remove excess liquid.
Specifications TC-L32E5 Power Source TC-L37E5 TC-L42E5 TC-L47E5 AC 110-127 V, 60 Hz 81 W 85 W 112 W Standby condition 0.15 W 0.15 W 0.1 W 0.1 W 16:9 32” class (32 inches measured diagonally) 37” class (37 inches measured diagonally) 42” class (42 inches measured diagonally) 47” class (46.9 inches measured diagonally) Aspect Ratio (No.
Frequently Asked Questions (FAQ) If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, visit the Panasonic web site for further assistance.
Questions Why is there no sound coming from the TV? Sound Why is the sound unusual, distorted, low volume or in another language? Why is there a clicking, ticking or buzzing sound coming from the TV unit? What is the easiest and best way to connect a High-Definition Cable or Satellite box to the TV? Why does the CC button not display Closed Caption? Why does the screen and back cover of the TV get warm? Other Why doesn’t the Remote Control work? Why is the “ANT/Cable” option at the top of the “Input
Questions How do I get EASY IPTV to work on my TV? Networking How do I check for the latest software (firmware) version for my TV? Can I use any USB WiFi adapter to connect the TV to my wireless network? How do I reset my TV to all factory defaults and settings? Answers 1. You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps (p. 39). 2. Connect the TV to the Internet through your router by an Ethernet cable or a compatible Panasonic USB wireless adapter. 3.
Index A Accessories ............................................................. 8 ANT/Cable ....................................................... 16, 46 Antenna ............................................................11, 16 Audio ...................................................................... 50 Audio, Advanced .................................................... 50 Auto power on ........................................................ 53 Auto Program ........................................
Limited Warranty (for U.S.A.
Customer Services Directory (for U.S.A. and Puerto Rico) Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
Limited Warranty (for Canada) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
Note
Note
TC-L32E5 32" LCD HDTV SPECIFICATIONS Dimensions (W x H x D) Mass Power Source Power Consumption 30.1" (764 mm) x 20.5" (519 mm) x 9.1" (230 mm) (Including TV stand) 30.1" (764 mm) x 18.7" (473 mm) x 2.1" (52 mm) (TV Set only) 24.3 lb. (11.0 kg) (Including TV stand) 19.9 lb. (9.0 kg) (TV Set only) AC 110-127 V, 60 Hz 71 W (Rated power) 0.15 W (Standby power) DIMENSIONS JACKS Top View Side Panel Front View Side View 2.1 (52) 18.7 (473) 20.5 (519) 30.1 (764) 3.2 (79) 13.8 (350) 9.
TC-L37E5 37" LCD HDTV SPECIFICATIONS Dimensions (W x H x D) Mass Power Source Power Consumption 34.4" (874 mm) x 22.9" (581 mm) x 9.4" (238 mm) (Including TV stand) 34.4" (874 mm) x 21.1" (534 mm) x 2.1" (52 mm) (TV Set only) 29.8 lb. (13.5 kg) (Including TV stand) 25.4 lb. (11.5 kg) (TV Set only) AC 110-127 V, 60 Hz 81 W (Rated power) 0.15 W (Standby power) DIMENSIONS JACKS Top View Side Panel Front View Side View 2.1 (52) 21.1 (534) 22.9 (581) 34.4 (874) 3.5 (87) 14.8 (375) 9.
TC-L42E5 42" LCD HDTV SPECIFICATIONS Dimensions (W x H x D) Mass Power Source Power Consumption 39.3" (997 mm) x 25.6" (650 mm) x 9.8" (247 mm) (Including TV stand) 39.3" (997 mm) x 23.8" (604 mm) x 2.1" (52 mm) (TV Set only) 37.5 lb. (17.0 kg) (Including TV stand) 30.9 lb. (14.0 kg) (TV Set only) AC 110-127 V, 60 Hz 85 W (Rated power) 0.1 W (Standby power) DIMENSIONS JACKS Top View Side Panel Front View Side View 2.1 (52) 23.8 (604) 25.6 (650) 39.3 (997) 3.8 (96) 15.8 (400) 9.
TC-L47E5 47" LCD HDTV SPECIFICATIONS Dimensions (W x H x D) Mass Power Source Power Consumption 43.6" (1,107 mm) x 28.1" (712 mm) x 10.6" (268 mm) (Including TV stand) 43.6" (1,107 mm) x 26.3" (666 mm) x 2.1" (52 mm) (TV Set only) 44.1 lb. (20.0 kg) (Including TV stand) 36.4 lb. (16.5 kg) (TV Set only) AC 110-127 V, 60 Hz 112 W (Rated power) 0.1 W (Standby power) DIMENSIONS JACKS Top View Side Panel Front View Side View 2.1 (52) 26.3 (666) 28.1 (712) 43.6 (1107) 4.7 (117) 17.0 (430) 10.
USA only: Disposal may be regulated in your community due to Environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149. Sólo Estados Unidos: La disposición puede estar regulada en su comunidad debido a consideraciones ambientales. Para información sobre la disposición o reciclaje, por favor visite la página web de Panasonic: http://www.panasonic.com/environmental ó llame al 1-888-769-0149.
