User`s guide
Table Of Contents
- Table of Contents
- Overview
- Preparation
- Operating the unit
- Administrating the unit
- Basic Operations of the Administrator Menu
- Configuring the System - System Menu
- Setting the Camera Image and Audio - Camera Menu
- Configuring the Network - Network Menu
- Setting the SSL function - SSL Menu
- Using the 802.1X Authentication Function - 802.1X Menu
- Setting the User - User Menu
- Setting the Security - Security Menu
- Saving the Camera Position and Action - Preset position Menu
- Sending an Image via E-mail - e-Mail (SMTP) Menu
- Sending Images to FTP Server - FTP client Menu
- Recording Images in Memory - Image memory Menu
- Downloading Images from the system - FTP server Menu
- Setting the Alarm Output - Alarm output Menu
- Outputting Audio Linked to Alarm Detection - Voice alert Menu
- Setting the Operations from the Viewer - Trigger Menu
- Setting the Schedule - Schedule Menu
- Setting the Alarm Buffer - Alarm buffer Menu
- Setting the Motion Detection/VMF Function - Motion detection Menu
- Transmitting with External Equipment - PTZ control I/F Menu
- Configuring the Viewer - Viewer Menu
- Others
- Using the Supplied SNC toolbox
- Starting SNC toolbox
- How to use SNC toolbox
- Registering in My device
- Changing the Device list display method
- Setting SNC toolbox options
- Using Privacy Masking - Masking a Camera Image
- Using the Custom Homepage
- Using the Firmware Upgrade
- Using the Schedule Task
- Configuring the device setting
- Device restart and initialization
- Using the SNC audio upload tool - Transmitting Audio to unit
- Using the SNC video player - Playing a Video/ Audio File Recorded with the unit
- Assigning the IP Address to the unit using ARP Commands
- Using the SNMP
- Glossary
- Index
- Using the Supplied SNC toolbox
Operating the unit
Configuration of Main Viewer
19
Volume
(Displayed when Microphone (page 34) is set to On.)
Adjust the microphone volume by moving the each
slider bar.
When you click , the icon changes to and the
microphone input stops. To input the microphone, click
again.
When you click , the icon changes to and the
microphone output stops. To output the microphone,
click again.
Notes
• This operation is not available on the SNT-EP104 or
SNT-EP154.
• Voice alert configuration is only available for CH1 on
the SNT-EX154.
Camera control panel
On this panel, you can control the pan/tilt/home position
of the camera, adjust the zoom and switch focus mode
(page 21). In addition, you can obtain authority to
operate the camera when the exclusive control mode is
on.
Notes
• This operation is not available on the SNT-EP104 or
SNT-EP154.
• To operate the camera, it is necessary to have a camera
connected, and the connection/setting set correctly.
Pan/Tilt control
Click the arrow button the direction in which you want
to move the camera. Keep it pressed to move the camera
continuously.
Zoom control
Press to zoom out, and press to zoom in.
Zooming continues while the button remains pressed.
Focus control
To focus on a nearby object, press . To focus on a
distant object, press .
By pressing , focus is set to the optimum
position.
Note
To control the focus manually, set Focus mode of the
Camera menu to Manual (page 34).
(Exclusive control)
Click this button to display the time remaining for
operation authority. However, if operation authority has
not been obtained, the waiting time is displayed.
Trigger panel
The above is displayed only when Viewer mode
(page 53) is set to Full, and one or more triggers are
enabled in the Trigger menu (page 70).
The configured functions are displayed as buttons on
this panel.
Click the function button you want to use on the Trigger
panel. The selected function is activated. The selectable
functions are as follows:
• send still image files attached to an e-mail (page 22)
• send still image files to an FTP server (page 22)
• record still image files in the built-in memory or USB
memory (not supplied) (page 22)
• control the alarm output (page 23)
• play the audio file stored in the system (page 23)