Quick Setup Guide
SMP-N200/NX20
4-412-638-11(2)
Welcome to Sony
Thank you for your purchase
of the Sony Streaming Player.
1 Connect to your TV 2 Power on
Before setup, please conrm the following.
Supplied accessories
AC adapter (1) AC power cord (1)
Remote control (Remote)
(with CR2032 battery) (1)
Audio/video cable
(phono plug × 3) (1)
HDMI cable (1)
(SMP-NX20 only)
Additional items required (not supplied)
TV
HDMI cable (for a high-denition TV)
Broadband Internet connection
LAN cable (for a wired connection)
Wireless LAN router (for a wireless connection)
Follow the next ve easy steps to use the player.
For a high-denition TV
Using a HDMI cable is recommended.
HDMI cable (not supplied
(supplied with SMP-NX20))
For a standard-denition TV
Audio/video cable
(supplied)
1 Connect the AC adapter and AC power cord, and then insert
the plug into the AC outlet.
After connecting, the player will automatically enter standby
in about 30 seconds.
2 Remove the insulation lm from the remote.
3 Press to turn on the player.
4 Turn on the TV and set it to the input that the player is
connected to.
4-412-638-11(2)
Network Media Player
SMP-N200/NX20
Quick
Setup
Guide
Start
here...