Instruction Manual

34
Selecting a function with the Fn
(Function) button
This button is used for setting up or executing functions used frequently in
shooting, except for functions from the Quick Navi screen.
To set up the camera directly from the recording information
screen
Turn the front control dial without pressing the center z in step 3. You can
set up the camera directly from the recording information screen.
Additionally, some functions can be fine-tuned using the rear control dial.
1 Press the DISP button to set the screen mode to other than [For
viewfinder] (page 30).
2 Press the Fn button.
3 Select the desired item with v/V/b/B on the multi-selector,
then press the center z to execute.
The setup screen appears.
4 Following the operation guide,
select and execute the desired
function.
Operation guide