α Handbook
Table Of Contents
- Table of contents
- Introduction of functions
- Before use
- Functions list
- Preparing the camera
- Shooting and viewing images
- Selecting a shooting mode
- Switching the recording information display
- Adjusting the focus
- Adjusting the brightness of the image
- Using the drive mode
- Advanced shooting
- Using the flash (sold separately)
- Flash modes available
- Flash Compensation
- Flash control
- FEL lock
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Setting the image processing
- Adjusting the color tones (White balance)
- Setting image size
- Setting the aspect ratio and image quality
- Detecting faces
- Smile Shutter
- Zooming
- Reducing the noise in an image
- Setting the color space
- Movie recording setup
- Advanced playback
- Setup of the camera
- Viewing images on a computer
- Troubleshooting/Others
- Index
89
Switching the recording information display (DISP)
Switching the recording information display
Notes
• The histogram does not indicate the final recorded image. It indicates the condition
of the image just monitored on the screen. The histogram will differ based on
aperture setting, etc.
• The histogram differs between shooting and playback in the following situations:
– When firing the flash.
– When the subject has low intensity, such as night scenery.
You can monitor the subject through the lens without effects, such as the
exposure compensation, white balance, Creative Style, Picture Effect etc.,
displayed.
Histogram
The histogram displays the luminance
distribution that shows how many pixels
of a particular brightness exist in the
picture.
The exposure compensation will change
the histogram accordingly.
Both ends of the histogram show a high-
key or low-key portion. You cannot
restore these area with a computer later.
Adjust the exposure if necessary and
shoot again.
Monitoring the subject through the lens without effects
displayed
Number of pixels
Dark Light










