α Handbook
Table Of Contents
- Table of contents
- Introduction of functions
- Before use
- Functions list
- Preparing the camera
- Shooting and viewing images
- Selecting a shooting mode
- Switching the recording information display
- Adjusting the focus
- Adjusting the brightness of the image
- Using the drive mode
- Advanced shooting
- Using the flash (sold separately)
- Flash modes available
- Flash Compensation
- Flash control
- FEL lock
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Setting the image processing
- Adjusting the color tones (White balance)
- Setting image size
- Setting the aspect ratio and image quality
- Detecting faces
- Smile Shutter
- Zooming
- Reducing the noise in an image
- Setting the color space
- Movie recording setup
- Advanced playback
- Setup of the camera
- Viewing images on a computer
- Troubleshooting/Others
- Index
87
Switching the recording information display
Switching the recording information display
Switching the recording information
display (DISP)
• You can display all the information on the screen or the Graphic Display
that shows the shutter speed and aperture value as graphs.
You can select the desired screen mode. When you switch the screen by
pressing the DISP button, only selected screens are displayed. You can set
the available screens to be displayed on the LCD screen and the viewfinder
separately.
Each time you press the DISP button, the
recording information display changes as
follows in the default settings.
DISP button
Selecting the screen mode
1 MENU button t 2 t [DISP Button(Monitor)] or [DISP
Button(Finder)]
2 Select the desired display with v/V/b/B on the multi-selector,
then press the center of the multi-selector.
3 Press the MENU button.
No Disp. Info. LevelFor viewfinder Histogram