α Handbook

60
Shooting a clear image without camera
shake
“Camera shake” refers to unwanted movement of the camera that occurs
after the shutter button has been pressed, resulting in a blurred image.
To reduce camera shake follow the instructions below.
Note
• The camera shake warning indicator does not appear in the following situations:
– The exposure mode is set to M/S, or during movie recording.
– When the viewing mode is set to other than [Display All Info.] (page 87).
The SteadyShot function is available with this camera to reduce camera
shake. The SteadyShot function can be set separately for still image
shooting and for movie recording.
The SteadyShot function is set to [On] for still image shooting and [Off] for
movie recording in the default settings.
MENU button t 3 or 1 t [SteadyShot] t Select the
desired setting
• You can also set the SteadyShot function used for still image shooting
from the Quick Navi screen (page 31).
Camera shake warning indicator
In situations where the camera may be
subject to camera-shake, the
(Camera shake warning) indicator
flashes. In this case, use a tripod or the
flash.
(Camera shake warning)
indicator
Using the SteadyShot function