α Handbook
Table Of Contents
- Table of contents
- Introduction of functions
- Before use
- Functions list
- Preparing the camera
- Shooting and viewing images
- Selecting a shooting mode
- Switching the recording information display
- Adjusting the focus
- Adjusting the brightness of the image
- Using the drive mode
- Advanced shooting
- Using the flash (sold separately)
- Flash modes available
- Flash Compensation
- Flash control
- FEL lock
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Setting the image processing
- Adjusting the color tones (White balance)
- Setting image size
- Setting the aspect ratio and image quality
- Detecting faces
- Smile Shutter
- Zooming
- Reducing the noise in an image
- Setting the color space
- Movie recording setup
- Advanced playback
- Setup of the camera
- Viewing images on a computer
- Troubleshooting/Others
- Index
59
Preparing the camera
Adjusting the angle of the LCD screen
Adjust the LCD screen to an easily
viewable angle.
• Put your finger on the upper-left part of
the LCD screen and draw it toward you.
• The LCD screen tilts 140 degrees
upward and 180 degrees downward.
• The LCD screen rotates 180 degrees
clockwise and 90 degrees
counterclockwise.
• When the LCD screen is not used, it is
recommended that you close it with the
screen side facing to the camera.
Note
• When the LCD screen is open, the eyepiece
sensors may not be able to function in
situations involving low-position shooting. If
you look into the viewfinder and the viewing
mode does not switch from the monitor to the
viewfinder automatically, press the FINDER/
LCD button.