α Handbook

185
Setting the method for recording on a memory card
Setup of the camera
• If you set [Recording Mode] to other than [Standard] and start recording, a new
folder may be created automatically.
• When you insert a memory card that has been used with other equipment into the
camera and shoot images, a new folder may be created automatically.
• Up to 4,000 images can be stored in a folder. When the folder capacity is exceeded, a
new folder is created automatically.
When inconsistencies are found in the image database file, caused by
processing images on computers, etc., images on the memory card will not
be played back in this form. If this happens, the camera repairs the file.
MENU button t 2 t [Recover Image DB] t Select the
desired slot t [Enter]
Note
• Use a sufficiently charged battery. Low battery power during repairing can cause
damage to data.
You can use the upload function with an Eye-Fi card (commercially
available). This item appears when an Eye-Fi card is inserted in a memory
card slot 1 of the camera.
MENU button t 3 t [Upload Settings] t [On]
The status indicators in communication
Notes
• The status indicators in communication are displayed only when [Recording Mode]
is set to [Standard].
Recover Image DB
Upload Settings
Standby. No images are to be sent.
Upload standby.
Connecting.
Uploading.
Error.