α Handbook
Table Of Contents
- Table of contents
- Introduction of functions
- Before use
- Functions list
- Preparing the camera
- Shooting and viewing images
- Selecting a shooting mode
- Switching the recording information display
- Adjusting the focus
- Adjusting the brightness of the image
- Using the drive mode
- Advanced shooting
- Using the flash (sold separately)
- Flash modes available
- Flash Compensation
- Flash control
- FEL lock
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Setting the image processing
- Adjusting the color tones (White balance)
- Setting image size
- Setting the aspect ratio and image quality
- Detecting faces
- Smile Shutter
- Zooming
- Reducing the noise in an image
- Setting the color space
- Movie recording setup
- Advanced playback
- Setup of the camera
- Viewing images on a computer
- Troubleshooting/Others
- Index
180
Setting the other functions of the camera
When [PAL/NTSC Selector] is set to the NTSC-system before shooting,
movies recorded with the camera can be played back on an NTSC-system
TV.
MENU button t 3 t [PAL/NTSC Selector] t Select the
desired setting
Notes
• This function is provided with 1080 50i-compatible devices only. It is not provided
with 1080 60i-compatible devices. The 1080 50i-compatible devices have a “50i”
mark on the bottom of the camera.
• If you insert a memory card that has previously been formatted with the PAL system,
a message telling you that you must re-format the card appears. When you record
using the NTSC system, re-format the memory card or use another memory card.
• When the NTSC mode is selected, the “Running on NTSC.” message always
appears on the start-up screen each time you turn the camera on.
PAL/NTSC Selector (only for the 1080 50i-compatible
device)