α Handbook
Table Of Contents
- Table of contents
- Introduction of functions
- Before use
- Functions list
- Preparing the camera
- Shooting and viewing images
- Selecting a shooting mode
- Switching the recording information display
- Adjusting the focus
- Adjusting the brightness of the image
- Using the drive mode
- Advanced shooting
- Using the flash (sold separately)
- Flash modes available
- Flash Compensation
- Flash control
- FEL lock
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Setting the image processing
- Adjusting the color tones (White balance)
- Setting image size
- Setting the aspect ratio and image quality
- Detecting faces
- Smile Shutter
- Zooming
- Reducing the noise in an image
- Setting the color space
- Movie recording setup
- Advanced playback
- Setup of the camera
- Viewing images on a computer
- Troubleshooting/Others
- Index
126
Compensating for the brightness and
contrast automatically (D-Range)
Fn button t (DRO/Auto HDR) t Select the desired setting
* Lv_ displayed with is the step currently selected.
Notes
• The setting is fixed to [Off] when the exposure mode is set to Sweep Panorama, or
when [Multi Frame Noise Reduct.] or [Picture Effect] is used.
• The setting is fixed to [Off] when [Sunset], [Night Scene], [Night Portrait], or
[Hand-held Twilight] is selected in Scene Selection. The setting is fixed to [Auto]
when other modes are selected in Scene Selection.
(Off) Disables the DRO/Auto HDR functions.
(D-Range Opt.) By dividing the image into small areas, the camera analyses
the contrast of light and shadow between the subject and the
background, producing the image with the optimal brightness
and gradation.
(Auto HDR) Shoots 3 images with different exposures, and then overlays
the correctly exposed image, the bright areas of an under
exposed image and the dark areas of an over exposed image
to create an image with rich gradation.
2 images are recorded: an image with the correct exposure
and an overlaid image.
D-RangeOptimizer
1 Fn button t (DRO/Auto HDR) t (D-Range Opt.)
2 Select an optimal level with b/B on the multi-selector.
(D-Range
Optimizer: Auto)
Corrects the brightness automatically.
(Level)* Optimizes the gradations of a recorded image in each area of
the image. Select the optimal level between Lv1 (weak) and
Lv5 (strong).










