α Handbook
Table Of Contents
- Table of contents
- Introduction of functions
- Before use
- Functions list
- Preparing the camera
- Shooting and viewing images
- Selecting a shooting mode
- Switching the recording information display
- Adjusting the focus
- Adjusting the brightness of the image
- Using the drive mode
- Advanced shooting
- Using the flash (sold separately)
- Flash modes available
- Flash Compensation
- Flash control
- FEL lock
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Setting the image processing
- Adjusting the color tones (White balance)
- Setting image size
- Setting the aspect ratio and image quality
- Detecting faces
- Smile Shutter
- Zooming
- Reducing the noise in an image
- Setting the color space
- Movie recording setup
- Advanced playback
- Setup of the camera
- Viewing images on a computer
- Troubleshooting/Others
- Index
103
Adjusting the focus
Adjusting the focus
• The outline of in-focus ranges is not enhanced when the camera is connected using
an HDMI cable.
To set the color of the peaking function
You can set the color used for the peaking function.
MENU button t 3 t [Peaking Color] t Select the desired setting
Note
• This item cannot be set when [Peaking Level] is set to [Off].
You can check the focus by enlarging the image before shooting.
Focus Magnifier
1 MENU button t 4 t [Smart Telecon. Button] t [Focus
Magnifier]
2 Press the Focus Magnifier button.
Focus Magnifier button