Location of Controls M7 Rain unit 1] POWER switch [2] Remote sensor (3] display window [A] SELECT 10 button and indicator PERSONAL FILE 1-5 button and indicator [B1£4LAT and numeric buttons and indicators [T} CURSOR CONTROL buttons {81 TAPELINE buttons and indicators when e POWER is an, the LINE mode is selected.
Equalizing the Sound with Preset Settings (SELECT 10) The SELECT 50 unctions flaws you 1o equalizer the sound, simply by choosing from %0 prose combinations of equalization and DSC (Dynamic Sound Control), See ags & for details switching EFFECT on and off. compare the results. Tre inspection analyzer oan be used ta visually confirm the dean for and effect of, equalizer adjustment, e Each tme you prods DISPLAY, the display switches Between e equalizer Curve and spectrum analyzer.
Equalizing the Sound with Preset Settings (SELECT FLAT Gives sk expansiveness @ rouses recorded with reverberation, bus as classical music. Gives the smartphone of 2 large hall wih a reeds reverberation and emphasized middies-low frequencies. 3 Givers an lithosphere similar 1o a movie tester in which song effects and 2 voluminous bass sound is emphasized.
Obtaining a Desired Equalizer Curve You can adjust the level of 7 frequency bands tor both channels. REVERSE DSC 3 brass aor >, 50 that the frequency range you wish to adjust blinks., 4 Cross adjust the level of the frequency range. Otter the adjustment is completed Approximately 5 sweatbands after the adjustment is completed, the display rectums 1o the sound level display.
Obtaining a Desired Equalizer Curve L .Banjoists or cuts the bass. 180 Hz. Governs the low-middies range and greatly influences the overall characteristics of the sound 400 Hz: Adjusts the power, spaciousness and waspish of the sound Provides more presence for vocals 2.8 KHz: Boosts & brighter sound and refuges stridency. 53 kHz: Affects the treble. Adjusts the brightness of the sound and traduces high frequency noise, such as tape hies 16 kie: Adjusts the general atmospheres rather than the sound tsetse.
