User Guide
Table Of Contents
- GB
- Precautions
- Identifying parts and controls
- Setup
- Setup 1: Connect a computer equipped with a DVI output connector (digital RGB)
- Setup 2: Connect a computer equipped with an HD15 output connector (analog RGB)
- Setup 3: Connect the audio cord
- Setup 4: Connect the power cord
- Setup 5: Bundle the cords and cables
- Setup 6: Turn on the monitor and computer
- Setup 7: Adjust the tilt and swivel
- Selecting the input signal (INPUT button)
- Connecting Universal Serial Bus (USB) compliant peripherals
- Customizing Your Monitor
- Technical Features
- Troubleshooting
- Specifications
- FR
- Précautions
- Identification des composants et des commandes
- Installation
- Réglage 1 : Raccordez un ordinateur équipé d’un connecteur de sortie DVI (RVB numérique)
- Réglage 2 : Raccordez un ordinateur équipé d’un connecteur de sortie HD15 (RVB analogique)
- Réglage 3 : Branchez le câble audio
- Réglage 4 : Branchez le câble d’alimentation
- Réglage 5 : Regroupez les cordons et les câbles
- Réglage 6 : Mettez le moniteur et l’ordinateur sous tension
- Réglage 7 : Réglage de l’inclinaison et du pivotement
- Sélection du signal d’entrée (Touche INPUT)
- Raccordement de périphériques compatibles USB (Universal Serial Bus)
- Personnalisation de votre moniteur
- Spécifications techniques
- Dépannage
- Spécifications
- DE
- Sicherheitsmaßnahmen
- Lage und Funktion der Teile und Bedienelemente
- Installation
- Schritt 1: Anschließen eines Computers mit einem DVI-Ausgangsanschluss (digitales RGB)
- Schritt 2: Anschließen eines Computers mit einem HD15-Ausgangsanschluss (analoges RGB)
- Schritt 3: Anschließen des Audiokabels
- Schritt 4: Anschließen des Netzkabels
- Schritt 5: Bündeln der Kabel
- Schritt 6: Einschalten von Monitor und Computer
- Schritt 7: Einstellen von Neigung und Drehung
- Auswählen des Eingangssignals (Taste INPUT)
- Anschließen von USB-kompatiblen Peripheriegeräten (USB - Universeller Serieller Bus)
- Einstellen des Monitors
- Technische Merkmale
- Störungsbehebung
- Technische Daten
- ES
- Precauciones
- Identificación de componentes y controles
- Configuración
- Paso 1: Conexión de un ordenador equipado con un conector de salida DVI (RGB digital)
- Paso 2: Conexión de un ordenador equipado con un conector de salida HD15 (RGB analógico)
- Paso 3: Conexión del cable de audio
- Paso 4: Conexión del cable de alimentación
- Paso 5: Agrupación de los cables
- Paso 6: Encendido del monitor y el ordenador
- Paso 7: Ajuste de la inclinación y el giro
- Selección de la señal de entrada (botón INPUT)
- Conexión de dispositivos periféricos compatibles con USB (Bus serie universal)
- Personalización del monitor
- Características técnicas
- Solución de problemas
- Especificaciones
- IT
- Precauzioni
- Identificazione delle parti e dei comandi
- Installazione
- Punto 1: Collegamento a un computer dotato di connettore di uscita DVI (RGB digitale)
- Punto 2: Collegamento a un computer dotato di connettore di uscita HD15 (RGB analogico)
- Punto 3: Collegamento del cavo audio
- Punto 4: Collegamento del cavo di alimentazione
- Punto 5: Raggruppamento di cavi e fili
- Punto 6: Accensione del monitor e del computer
- Punto 7: Regolazione dell’inclinazione e dell’altezza
- Selezione del segnale di ingresso (tasto INPUT)
- Collegamento di periferiche conformi allo standard Universal Serial Bus (USB)
- Personalizzazione del monitor
- Funzioni
- Guida alla soluzione dei problemi
- Caratteristiche tecniche
- RU
- Ìå²û ï²åäîñòî²îæíîñòè
- ÈäåíòèôèêàöèØ äåòàëåé è î²ãàíîâ óï²àâëåíèØ
- Ïîäãîòîâêà ê ²àáîòå
- Ïîäãîòîâêà ê ²àáîòå 1: Ïîäêë ÷èòå êîìïü òå², îáî²óäîâàííûé âûõîäíûì ãíåçäîì DVI (öèô²îâîé RGB)
- Ïîäãîòîâêà ê ²àáîòå 2: Ïîäêë ÷èòå êîìïü òå², îáî²óäîâàííûé âûõîäíûì ãíåçäîì HD15 (àíàëîãîâûé RGB)
- Ïîäãîòîâêà ê ²àáîòå 3: Ïîäêë ÷èòå àóäèîêàáåëü
- Ïîäãîòîâêà ê ²àáîòå 4: Ïîäêë ÷èòå êàáåëü ïèòàíèØ
- Ïîäãîòîâêà ê ²àáîòå 5: Óëîæèòå ïó÷îê êàáåëåé
- Ïîäãîòîâêà ê ²àáîòå 6: Âêë ÷èòå ìîíèòî² è êîìïü òå²
- Ïîäãîòîâêà ê ²àáîòå 7: Îò²åãóëè²óéòå íàêëîí è ïîâî²îò
- Âûáî² âõîäíîãî ñèãíàëà (êíîïêà INPUT)
- Ïîäêë ÷åíèå ïå²èôå²èéíûõ óñò²îéñòâ, ñîâìåñòèìûõ ñî ñòàíäà²òîì USB (óíèâå²ñàëüíàØ ïîñëåäîâàòåëüíàØ...
- Ïîäñò²îéêà ìîíèòî²à
- Òåõíè÷åñêèå îñîáåííîñòè
- Óñò²àíåíèå íåèñï²àâíîñòåé
- Òåõíè÷åñêèå õà²àêòå²èñòèêè
- SE
- Viktigt
- Placering av reglage och anslutningar
- Installation
- Inställning 1: Anslut en dator som har en DVI-utgång (digital RGB)
- Inställning 2: Anslut en dator som har en HD15-utgång (analog RGB)
- Inställning 3: Anslut ljudkabeln
- Inställning 4: Anslut nätkabeln
- Inställning 5: Bunta ihop kablar och sladdar
- Inställning 6: Slå på strömmen till bildskärm och dator
- Inställning 7: Justera lutning och vridning
- Välja insignal (INPUT-knapp)
- Ansluta USB-kompatibel (Universal Serial Bus) kringutrustning
- Anpassa bildskärmen
- Tekniska funktioner
- Felsökning
- Specifikationer
- NL
- Voorzorgsmaatregelen
- Onderdelen en bedieningselementen
- Opstelling
- Instelling 1: Een computer aansluiten die is voorzien van een DVI uitgang (digitaal RGB)
- Instelling 2: Een computer aansluiten die is voorzien van een HD15 uitgang (analoog RGB)
- Instelling 3: De audiokabel aansluiten
- Instelling 4: Het netsnoer aansluiten
- Instelling 5: Snoeren en kabels bundelen
- Instelling 6: De monitor en de computer aanzetten
- Instelling 7: De hellingshoek en de hoogte regelen
- Het ingangssignaal selecteren (INPUT toets)
- USB-randapparatuur (Universal Serial Bus) aansluiten
- De monitor instellen
- Technische kenmerken
- Verhelpen van storingen
- Technische gegevens
- TCO’99 Eco-document

2
D:\My Documents\_upload job\4090496221\4090496221SDMX202AEP\01COV-
SDMX202AEP\01GB02GET-AEP.fm
masterpage:Left
SDM-X202
4-090-496-22(1)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No.
Serial No.
To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
(for the gray model)
(for the black model)
WARNING
If you have any questions about this product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669)
or write to:
Sony Customer Information Center
1 Sony Drive, Mail Drop #T1-11, Park Ridge, NJ 07656
Declaration of Conformity
Trade Name: SONY
Model No.: SDM-X202
Responsible Party: Sony Electronics Inc.
Address: 680 Kinderkamack Road,Oradell,NJ 07649
USA
Telephone No.: 201-930-6972
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3
× 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3
×
18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an
E
NERGY
S
TAR Partner, Sony
Corporation has determined that this
product meets the
E
NERGY
S
TAR
guidelines for energy efficiency.
This monitor complies with the
TCO’99 guidelines.
This monitor complies with the
TCO’95 guidelines.










