User Guide
Table Of Contents
- GB
- Precautions
- Identifying parts and controls
- Setup
- Setup 1: Connect a computer equipped with a DVI output connector (digital RGB)
- Setup 2: Connect a computer equipped with an HD15 output connector (analog RGB)
- Setup 3: Connect the audio cord
- Setup 4: Connect the power cord
- Setup 5: Bundle the cords and cables
- Setup 6: Turn on the monitor and computer
- Setup 7: Adjust the tilt and swivel
- Selecting the input signal (INPUT button)
- Connecting Universal Serial Bus (USB) compliant peripherals
- Customizing Your Monitor
- Technical Features
- Troubleshooting
- Specifications
- FR
- Précautions
- Identification des composants et des commandes
- Installation
- Réglage 1 : Raccordez un ordinateur équipé d’un connecteur de sortie DVI (RVB numérique)
- Réglage 2 : Raccordez un ordinateur équipé d’un connecteur de sortie HD15 (RVB analogique)
- Réglage 3 : Branchez le câble audio
- Réglage 4 : Branchez le câble d’alimentation
- Réglage 5 : Regroupez les cordons et les câbles
- Réglage 6 : Mettez le moniteur et l’ordinateur sous tension
- Réglage 7 : Réglage de l’inclinaison et du pivotement
- Sélection du signal d’entrée (Touche INPUT)
- Raccordement de périphériques compatibles USB (Universal Serial Bus)
- Personnalisation de votre moniteur
- Spécifications techniques
- Dépannage
- Spécifications
- DE
- Sicherheitsmaßnahmen
- Lage und Funktion der Teile und Bedienelemente
- Installation
- Schritt 1: Anschließen eines Computers mit einem DVI-Ausgangsanschluss (digitales RGB)
- Schritt 2: Anschließen eines Computers mit einem HD15-Ausgangsanschluss (analoges RGB)
- Schritt 3: Anschließen des Audiokabels
- Schritt 4: Anschließen des Netzkabels
- Schritt 5: Bündeln der Kabel
- Schritt 6: Einschalten von Monitor und Computer
- Schritt 7: Einstellen von Neigung und Drehung
- Auswählen des Eingangssignals (Taste INPUT)
- Anschließen von USB-kompatiblen Peripheriegeräten (USB - Universeller Serieller Bus)
- Einstellen des Monitors
- Technische Merkmale
- Störungsbehebung
- Technische Daten
- ES
- Precauciones
- Identificación de componentes y controles
- Configuración
- Paso 1: Conexión de un ordenador equipado con un conector de salida DVI (RGB digital)
- Paso 2: Conexión de un ordenador equipado con un conector de salida HD15 (RGB analógico)
- Paso 3: Conexión del cable de audio
- Paso 4: Conexión del cable de alimentación
- Paso 5: Agrupación de los cables
- Paso 6: Encendido del monitor y el ordenador
- Paso 7: Ajuste de la inclinación y el giro
- Selección de la señal de entrada (botón INPUT)
- Conexión de dispositivos periféricos compatibles con USB (Bus serie universal)
- Personalización del monitor
- Características técnicas
- Solución de problemas
- Especificaciones
- IT
- Precauzioni
- Identificazione delle parti e dei comandi
- Installazione
- Punto 1: Collegamento a un computer dotato di connettore di uscita DVI (RGB digitale)
- Punto 2: Collegamento a un computer dotato di connettore di uscita HD15 (RGB analogico)
- Punto 3: Collegamento del cavo audio
- Punto 4: Collegamento del cavo di alimentazione
- Punto 5: Raggruppamento di cavi e fili
- Punto 6: Accensione del monitor e del computer
- Punto 7: Regolazione dell’inclinazione e dell’altezza
- Selezione del segnale di ingresso (tasto INPUT)
- Collegamento di periferiche conformi allo standard Universal Serial Bus (USB)
- Personalizzazione del monitor
- Funzioni
- Guida alla soluzione dei problemi
- Caratteristiche tecniche
- RU
- Ìå²û ï²åäîñòî²îæíîñòè
- ÈäåíòèôèêàöèØ äåòàëåé è î²ãàíîâ óï²àâëåíèØ
- Ïîäãîòîâêà ê ²àáîòå
- Ïîäãîòîâêà ê ²àáîòå 1: Ïîäêë ÷èòå êîìïü òå², îáî²óäîâàííûé âûõîäíûì ãíåçäîì DVI (öèô²îâîé RGB)
- Ïîäãîòîâêà ê ²àáîòå 2: Ïîäêë ÷èòå êîìïü òå², îáî²óäîâàííûé âûõîäíûì ãíåçäîì HD15 (àíàëîãîâûé RGB)
- Ïîäãîòîâêà ê ²àáîòå 3: Ïîäêë ÷èòå àóäèîêàáåëü
- Ïîäãîòîâêà ê ²àáîòå 4: Ïîäêë ÷èòå êàáåëü ïèòàíèØ
- Ïîäãîòîâêà ê ²àáîòå 5: Óëîæèòå ïó÷îê êàáåëåé
- Ïîäãîòîâêà ê ²àáîòå 6: Âêë ÷èòå ìîíèòî² è êîìïü òå²
- Ïîäãîòîâêà ê ²àáîòå 7: Îò²åãóëè²óéòå íàêëîí è ïîâî²îò
- Âûáî² âõîäíîãî ñèãíàëà (êíîïêà INPUT)
- Ïîäêë ÷åíèå ïå²èôå²èéíûõ óñò²îéñòâ, ñîâìåñòèìûõ ñî ñòàíäà²òîì USB (óíèâå²ñàëüíàØ ïîñëåäîâàòåëüíàØ...
- Ïîäñò²îéêà ìîíèòî²à
- Òåõíè÷åñêèå îñîáåííîñòè
- Óñò²àíåíèå íåèñï²àâíîñòåé
- Òåõíè÷åñêèå õà²àêòå²èñòèêè
- SE
- Viktigt
- Placering av reglage och anslutningar
- Installation
- Inställning 1: Anslut en dator som har en DVI-utgång (digital RGB)
- Inställning 2: Anslut en dator som har en HD15-utgång (analog RGB)
- Inställning 3: Anslut ljudkabeln
- Inställning 4: Anslut nätkabeln
- Inställning 5: Bunta ihop kablar och sladdar
- Inställning 6: Slå på strömmen till bildskärm och dator
- Inställning 7: Justera lutning och vridning
- Välja insignal (INPUT-knapp)
- Ansluta USB-kompatibel (Universal Serial Bus) kringutrustning
- Anpassa bildskärmen
- Tekniska funktioner
- Felsökning
- Specifikationer
- NL
- Voorzorgsmaatregelen
- Onderdelen en bedieningselementen
- Opstelling
- Instelling 1: Een computer aansluiten die is voorzien van een DVI uitgang (digitaal RGB)
- Instelling 2: Een computer aansluiten die is voorzien van een HD15 uitgang (analoog RGB)
- Instelling 3: De audiokabel aansluiten
- Instelling 4: Het netsnoer aansluiten
- Instelling 5: Snoeren en kabels bundelen
- Instelling 6: De monitor en de computer aanzetten
- Instelling 7: De hellingshoek en de hoogte regelen
- Het ingangssignaal selecteren (INPUT toets)
- USB-randapparatuur (Universal Serial Bus) aansluiten
- De monitor instellen
- Technische kenmerken
- Verhelpen van storingen
- Technische gegevens
- TCO’99 Eco-document

10
If no picture appears on your screen
• Check that the power cord and the video signal cable are
properly connected.
• If “No input signal” appears on the screen:
– Check that the input priority setting is correct (page 16).
– The computer is in the power saving mode. Try pressing any
key on the keyboard or moving the mouse.
– Check that the input signal setting is correct by pressing the
INPUT button (page 11).
• If “Cable disconnected” appears on the screen:
– Check that the video signal cable is properly connected.
– Check that the input signal setting is correct by pressing the
INPUT button (page 11).
• If “Not supported signal” appears on the screen, reconnect the
old monitor. Then adjust the computer’s graphics board within
the following ranges.
For more information about on-screen messages, see “Trouble
symptoms and remedies” on page 21.
No need for specific drivers
The monitor complies with the “DDC” Plug & Play standard and
automatically detects all the monitor’s information. No specific driver
needs to be installed on the computer.
The first time you turn on your computer after connecting the monitor, the
setup Wizard may appear on the screen. In this case, follow the on-screen
instructions. The Plug & Play monitor is automatically selected so that
you can use this monitor.
The vertical frequency is set to 60 Hz.
Since flickers are unobtrusive on the monitor, you can use it as it is. You
do not need to set the vertical frequency to any particular high value.
Setup 7:Adjust the tilt and swivel
This monitor can be adjusted within the angles shown below.
To use the monitor comfortably
Adjust the viewing angle of your monitor according to the height
of your desk and chair, and so that light is not reflected from the
screen to your eyes.
Note
When adjusting the screen tilt and swivel, proceed slowly and carefully,
being sure not to hit the monitor against the desk.
Grasp the sides of the LCD panel, then adjust screen
tilt.
Analog RGB Digital RGB
Horizontal
frequency
28–92 kHz 28–75 kHz
Vertical
frequency
48–85 Hz 60 Hz
Resolution 1600 × 1200 or less 1600 × 1200 or less
approx. 5°
approx. 20°
approx. 45°
approx. 45°










