Quick Setup Guide

3 (US)
US
Connecting your monitor
Connect your monitor to a computer or other equipment.
1 Remove the back cover.
2 Connect your monitor to a computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
3 Connect the supplied power cord to the monitor’s
AC IN connector.
4 Connect the power cord to a power outlet.
Note
For details on securing the cords, refer to the Operating Instructions on the
CD-ROM.
Turning on the monitor and
computer
Turn on your monitor first, then a computer.
1 Press the MAIN POWER switch on the right side of
the monitor in the direction of the [.
The 1 (power) indicator lights up in red.
2 Press the 1 (power) switch on the front right of the
monitor.
The 1 (power) indicator lights up in green.
3 Turn on the computer.
• Turn off the monitor, computer, and any other
equipment before connecting them.
• Do not touch the pins of the video signal cable plug.
back cover
1
to the DVI-D input connector
(digital RGB) for INPUT1 or
INPUT2
to the HD15 input connector
(analog RGB) for INPUT1 or
INPUT2
2
HD15-HD15
video signal
cable (analog
RGB)
(supplied)
DVI-D video signal
cable (digital RGB)
(supplied)
4
power cord
(supplied)
3
to power
outlet
to AC IN
MAIN POWER
2
1