Operating Instructions
Table Of Contents
- HS53GB.PDF
- Top page
- Table of Contents
- Precautions
- Identifying parts and controls
- Setup
- Customizing Your Monitor
- Adjusting to the desired brightness
- Navigating the menu
- Adjusting the backlight (BACKLIGHT)
- Adjusting the contrast (CONTRAST)
- Adjusting the black level of an image (BRIGHTNESS)
- Adjusting the picture’s sharpness and centering (SCREEN)
- Adjusting the color temperature (COLOR)
- Changing the gamma setting (GAMMA)
- Changing the menu’s position (MENU POSITION)
- Selecting the on-screen menu language (LANGUAGE)
- Additional settings
- Technical Features
- Troubleshooting
6
Rear of the LCD display
The illustration of the back of the monitor show here is the
SDM-HS53.
7 Back cover (page 8)
Open this cover when you connect/disconnect cables or cords.
8 AC IN connector (page 8)
Connect the power cord (supplied).
9 HD15 (RGB) input connector (page 7)
This connector inputs RGB video signals (0.7 Vp-p, positive)
and SYNC signals.
* DDC (Display Data Channel) is a standard of VESA.
Open the back cover.
Pin No. Signal
1Red
2Green
3Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
5 4 3 2
1
678910
1112131415