User guide Stereo Bluetooth® Headset SBH80
Contents Introduction....................................................................................3 Function overview..............................................................................3 Hardware overview............................................................................3 Basics.............................................................................................5 Charging the battery..........................................................................5 Battery status.
Introduction Function overview Your Stereo Bluetooth® Headset SBH80 is designed to make life more convenient when you're on the go. You can use it together with an Android™ powered device such as a phone or tablet, or with a Bluetooth® compatible device such as a nonAndroid phone, a computer or a music player. When paired with a compatible device, you can use your headset to control incoming and outgoing phone calls or to listen to music.
8 Antenna 9 Volume down key Press to turn down the volume. 10 Call key Press to answer incoming calls. Press and hold down to reject incoming calls. 11 Volume up key Press to turn up the volume. 4 This is an Internet version of this publication. © Print only for private use.
Basics Charging the battery Before using the Stereo Bluetooth® Headset SBH80 for the first time, you need to charge the headset for approximately 2.5 hours. Sony chargers are recommended. To charge your headset 1 2 Plug one end of the USB cable into the charger or into the USB port of a computer. Plug the other end of the cable into the Micro USB port of your Stereo Bluetooth® Headset SBH80 device.
Resetting the headset Reset the headset if it behaves unexpectedly. Resetting the headset removes all information about paired devices. 1 2 To reset the headset Turn off the headset, then connect the charger so that the headset starts to charge. Press and hold down until the headset vibrates briefly.
Getting started Preparing to use your headset with a Bluetooth® device Before you can start using your headset with a Bluetooth® device, you need to pair the headset with the Bluetooth® device manually using Bluetooth® or automatically using NFC. 1 2 3 4 5 To manually pair your headset with a Bluetooth® device Bluetooth® device: Make sure the Bluetooth® function is turned on. Turn off your headset.
Using your headset Using your headset to handle phone calls Use the headset to handle incoming calls, for example, to answer or reject a call. • To answer a call with the headset When you hear an incoming call signal, press • To end a call During an ongoing call, press • To reject a call When you hear an incoming call signal, press and hold down • . . . To answer a second call When you hear an incoming call signal during an ongoing call, press ongoing call is put on hold. You can also press or .
In Multipoint mode, the headset remembers both paired devices. You can reconnect previously paired devices easily by manually switching back to Multipoint mode from Singlepoint mode. A previously paired device can then be detected automatically. You can only connect to a maximum of two devices in Multipoint mode. If you pair the headset with a third device, the first paired device gets disconnected.
Troubleshooting I cannot answer a second call • • Make sure that your calling device supports the Bluetooth® headset profile. Make sure that the correct calling device is selected. Music from another device does not play in the headset • • • Make sure that the music-playing device is paired with the headset. Restart the music player application on the music-playing device. Make sure that the correct music source is selected.
Legal information Sony SBH80 Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice.
Declaration of Conformity We, Sony Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony type RD-0040 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.7.1, EN 301 489-3:V1.6.1, EN 301 489-7:V1.3.1, EN 301 489-17:V2.2.
