S 3-859-854-13(1) ONY Wireless System Operating Instructions SA-IF70 Sony Corporation ©1997 Speaker
[] Wireless transmitter Amplifier [] Wireless speakers Receptor [] [] 2 To wall outlet
Top view [] Wireless transmitter \ / \ / / /' / _) [] [] (R)
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing qualified personnel only. to co k'OTItE_OVlE CO_J_ (OR a**_,<_ NO UIIERa _'_-_IUE pain'S I_Sq_E KEpER 8_RV_AqQ TO _ JALk_ED 8 Er_ OE FIS_S(Z'e.F_. This symbol is intended oninsulated "dangerous that may be of sufficient shock to persons.
Precaution On safety • Should any solid object or liquid fall into the enclosures, unplug the speaker system and have it checked by qualified personnel before operating it any further. On power sources • The AC power cord must be changed only at a qualified service • Before operating the speakers, check that the operating voltage identical with your local power supply. The operating voltage indicated on the nameplate on the rear of the speakers.
Setting up the speaker system Place the L - speaker to the left and the R - speaker to the right. Place the wireless speakers facin.__each other about 1 m (2 to 3 feet) above your listening position ([._). The approximate effective area of the infrared ray emitted from the transmitter is l0 m (30 feet) (['_l). Adjust the position, direction and angle of the transmitter so the wireless speakers (STANDBY (red) indicator and infrared receptor) are within the effective area.
Specifications Audio power Specifications For the wireless speaker system: with 8 ohm loads, both channels driven, from 60Hz - 20Hz; rated 25 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to the rated output.
Sony Corporation Printed in USA
