© 2006 Sony Corporation Printed in Malaysia 2-699-312-11 (1) Quick Start Guide NW-S202F / S203F / S205F / S202
Table of Contents Introduction..................................................................6 Getting Started.............................................................8 Supplied Items.......................................................................................................................... 8 Installing SonicStage..........................................................................................................
For Customers in Russia Notice for users The recorded song is limited to private use only. Use of the song beyond this limit requires permission of the copyright holders. Sony is not responsible for incomplete recording/downloading or damaged data due to problems of the player or computer. The ability to display the languages on your SonicStage will depend on the installed OS on your PC.
Introduction Thank you for purchasing the NW-S202F/S203F/S205F/S202*. To begin using the player, first import music songs into your computer using the SonicStage software, and then transfer them to the player. After transferring the music songs to the player, you can enjoy them wherever you go. Be sure to install the “SonicStage” software from the supplied CD-ROM in your computer.
Getting Started Supplied Items Check the following items. Headphones (1) USB cable (1) Arm band* (1) Clip* (1) This is used to clip onto your clothes when carrying the player. CD-ROM** (1) - SonicStage software - Operation Guide (PDF file) Quick Start Guide (this manual) (1) Attaching the player with the arm band Attach the player with the arm band following the procedure below. 1 2 Open the touch fastener, put your arm through the arm band, and then close the touch fastener temporarily.
Getting Started (continued) To remove the player from the arm band Pull the tab on the undersurface of the arm band’s holder in the direction of the arrow to detach the player, then release the player from the arm band’s holder . Installing SonicStage Install SonicStage according to the following instructions. If SonicStage is already installed, it will be overwritten. All functions and audio data from the previous installation will be preserved on the new installation.
Getting Started (continued) – CD-ROM drive (supporting Digital Music CD playback capabilities using WDM) To create original CDs or to back up audio CDs, a CD-R/RW drive is required. – Sound board – USB port (Hi-Speed USB is recommended) Internet Explorer 5.5 or later needs to be installed. Internet connection is required to use the CD Data Base (CDDB) or Electronic Music Distribution (EMD). We do not guarantee operation for all computers even if they meet the above System Requirements.
Importing Music Import audio data to your computer using the SonicStage. The methods of importing songs of CD are described here. 1 2 Double-click icon on the desktop. SonicStage starts up. Insert the audio CD that you want to import to hard drive of your computer. You can obtain CD information (song name or artist name, etc.) while connected to the Internet. 3 Place the pointer over [Music Source] at the top of the screen and click [Import a CD]. 4 Importing audio data starts.
Transferring Music Connect the player to your computer and transfer the audio data to the player. USB cable (supplied) 1 2 3 4 5 Double-click the icon on the desktop. SonicStage starts up. Connect the player to your computer with the supplied USB cable. Place the pointer over [Transfer] and select [ATRAC Audio Device] from the transfer destination list. Select an audio file(s) or album you want to transfer. Click to start transferring. To stop transferring, click .
Playing Music Basic Operation – Parts and Controls to To Operation Folder control mode (In play mode) Skip to the beginning of the next album/artist. Skip to the beginning of the current album/artist. VOL +*/– button Adjusts the volume. DISP/HOME button * button Starts song playback. When starting playback, appears at the bottom left of the display, and if the button is pressed again, appears and playback stops.
Playing Music (continued) Headphones Display Sorting status indication (Sort) / icon USB jack Rotate the lid to the left to set the OPEN position, and then open. Connect the player to the small connector of the supplied USB cable. To close the lid, rotate it to set the OPEN position and close, then rotate it to the right to set the LOCK position. 20 Headphone jack For connecting the headphones. Connect until it clicks into place.
Playing Music (continued) Play Modes and Settings The HOME screen appears when you press and hold the DISP/HOME button of the player. The HOME screen is the starting point to play audio, search for songs, and change settings. HOME Screen* * 5 of the 7 icons appear in the display with the current selection in the centre. The current icon changes depending on the function you use. By rotating the shuttle switch, you can select an icon and press the button to confirm.
Listening to FM Radio (NW-S202F/S203F/S205F only) button Hint In Preset Tuning, you cannot select broadcast stations if no preset stations are entered. Preset receivable broadcast stations in your area automatically by selecting “FM Auto Preset” in the SETTINGS menu. This is convenient when you use the FM tuner for the first time or when you change to a new area. Press and hold the DISP/HOME button until the HOME screen appears.
