Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
33
Connection/Installation
Mounting the gimbal on the aircraft
WARNING
Carefully follow these instructions. Errors in set-up may cause the
camera to detach and fall from the aircraft when in flight, which could
result in injury or property damage.
1 Make sure the aircraft is off.
Confirm that the power status LED of the aircraft is off.
BATTERY RELEASE
Power status LED
2 Mount the gimbal on the aircraft.
With the marks on the gimbal and quick-release aligned, attach the gimbal. Turn the ring
toward the lock icon ( ) until it clicks and locks into place.
Align the
marks and
attach the
gimbal.
Ring