SMO-F551 / RMO-S551 Magneto-Optical Disk Drive Installation Guide 1.
SMO-F551 / RMO-S551 Installation Guide Contents Installation Procedure on DOS and Windows3.1 Installation Procedure on Windows95/98 Installation Procedure on WindowsNT Installation Procedure on SUN Systems Installation Procedure on SGI Systems Installation Procedure on HP Systems Installation Procedure on SCO Systems Appendix 3 5 7 9 11 15 18 19 Printing History July 24, 1998 March 1, 1999 November 1, 1999 Version 1.1 Version 1.2 Version 1.
SMO-F551 / RMO-S551 Installation Guide Installation Procedure on DOS and Windows3.1 Requirements: 1. SCSI host adapter SCSI host adapter controls the command and data transfer between MO drive and host computer. (Ex. AHA-2940, AHA-3940 of Adaptec) 2. Device driver Device driver controls MO drive. Device driver is almost supplied with SCSI host adapter. If you use RMO-S551, we recommend to use the “Formatter One Pro TM” bundled with RMO-S551. 3.
SMO-F551 / RMO-S551 Installation Guide Note: - DOS and Window3.1 limit one partition size to 2.1GB. Please make a partition under 2.1GB per partition. - “Formatter One Pro TM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some device driver does not support 4.8GB or 5.2GB media. Please confirm the proper media before using the device driver. If you have any questions, please contact your dealer of the device driver. - DOS and Windows3.1 do not support WORM media.
SMO-F551 / RMO-S551 Installation Guide Installation Procedure on Windows95/98 Requirement: 1. SCSI host adapter SCSI host adapter controls the command and data transfer between MO drive and host computer. (Ex. AHA-2940, AHA-3940 of Adaptec) Most of SCSI host adapters are supported by Windows95/98. 2. Device driver Device driver controls MO drive. Windows95/98 encloses the device driver on installation CD-ROM or floppy disk.
SMO-F551 / RMO-S551 Installation Guide 3) Install the device driver 3)-1 Preparation - Turn on the MO drive and host computer. - Install the device driver on Windows95/98 and reboot the host computer. (Please refer to the user’s guide of the Device Driver) 3)-2 Format the media and partition - Format and Label the media using format utility software, such as “Formatter One Pro TM ”. Note: - Windows95/98 limits one partition size to 2.1GB, please make a partition under 2.1GB per partition.
SMO-F551 / RMO-S551 Installation Guide Installation Procedure on WindowsNT Requirement: 1. SCSI host adapter SCSI host adapter controls the command and data transfer between MO drive and host computer. (Ex. AHA-2940, AHA-3940) 2. Device driver Device driver controls MO drive. WindowsNT include the Device Driver. If you use RMO-S551, we recommend to use the “Formatter One Pro TM” is supplied with RMOS551. 3. SCSI cable SCSI cable is used for connecting host adapter and MO drive.
SMO-F551 / RMO-S551 Installation Guide b) Click on Disk Administrator again - Highlight the partitioned drive icon. - Click on Tools, then Format. Choose format type (see Notes) and volume label name. - Format the media. - Close Disk Administrator. 3) Install the device driver 3)-1 Preparation - Login WindowsNT - Install the device driver on WindowsNT and reboot the host computer.
SMO-F551 / RMO-S551 Installation Guide Installation Procedure on SUN System Test equipment: The following procedure was confirmed with the following system and drive combination: Host: OS: Target: SUN Ultra Enterprise 450 Solaris 2.3, Solaris 2.4, Solaris 2.5.1, Solaris 2.6 RMO-S551 - device type is set to 0 - 512 byte/sector media is used.
SMO-F551 / RMO-S551 Installation Guide : ctlr = SCSI : fmt_time = 2 ¥ : ncyl = 4003 : acyl = 2 : pcyl = 4005 : nhead = 32 : nsect = 31 ¥ : rpm = 3300 : bpt = 15872 # # This is a list of sample partition tables for Sony 5.25 inch MO disk.
SMO-F551 / RMO-S551 Installation Guide Installation Procedure on Silicon Graphics Systems Test equipment: The following procedure was confirmed with the following system and drive combination: Host: OS: Target: SGI O2 R5000, R10000 IRIX6.3 RMO-S551 Installation: 1) Connection - Attach the drive to the host using a proper SCSI cable. - Set proper SCSI ID on the MO drive. (In this case, SCSI ID = 4) - Set proper termination. Note: The SCSI ID number should be unique for each SCSI devices.
SMO-F551 / RMO-S551 Installation Guide . . ----- please choose one (? for help, .. to quit this menu)----[exi]t [d]ebug/ [l]abel/ [a]uto [b]adblock/ [exe]rcise/ [r]epartition/ [f]ormat fx> f fx/format: drive parameter to usr in formatting = (current) [enter] *********WARNING********* about to destroy data on disk dksc(1,4)! Ok? Yes [enter] . . 4) Repartition the media Repartition the media from “root drive” to “option drive” using following commands. ----- please choose one (? for help, ..
SMO-F551 / RMO-S551 Installation Guide ----- partitions----part type cyls 7: xfs 6 + 7738 8: volhd 0+6 10: volume 0 + 7761 15:xfslog 7744+17 capacity is 3973952 blocks blocks 3072 + 3961856 0 + 3072 0 + 3973632 3964928 + 8704 Megabytes 1 + 1934 0+1 0 + 1940 1936 + 4 (base+size) Megabytes 1 + 1934 0+1 0 + 1940 1936 + 4 (base+size) ----- please choose one (? for help, .. to quit this menu)----[ro]otdrive [o]ptiondrive [e]xpert [u]srrootdrive [re]size fx/repartition> ..
SMO-F551 / RMO-S551 Installation Guide ---- please choose one (? for help, .. to quit this menu)----[para]meters [part]itions [b]ootinfo [a]ll [g]eometry [s]giinfo [d]irectory fx/label/show> .. [enter] ----- please choose one (? for help, .. to quit this menu)----[sh]ow/ [sy]nc [se]t/ [c]reate/ fx/label> .. [enter] ----- please choose one (? for help, ..
SMO-F551 / RMO-S551 Installation Guide Installation Procedure on HP Systems Test equipment: The following procedure was confirmed with the following system and drive combination: UNIX Workstation: OS: Target: HP9000/712 HP-UX A.09.07 RMO-S551 Installation: 1) Connection - Connect MO drive and UNIX Workstation using proper SCSI cable. - Set proper SCSI ID on the MO drive. (In this case, SCSI ID = 4) - Set proper termination. Note: The ‘ioscan’ command is useful to scan SCSI bus.
SMO-F551 / RMO-S551 Installation Guide 3) Edit “disktab” file - Edit or add /etc/disktab file as following.
SMO-F551 / RMO-S551 Installation Guide 7) Confirm the result of mount command - Confirm the result of mount command using following command. # bdf /mo [Enter] (ex.4.1GB) Filesystem kbytes /dev/dsk/c201d4s0 1900868 used 9 avail 1710772 capacity 0% Mounted on /mo (ex.4.8GB) Filesystem /dev/dsk/c201d4s0 kbytes 2228170 used 9 avail 2005344 capacity 0% Mounted on /mo (ex.5.
SMO-F551 / RMO-S551 Installation Guide Installation Procedure on SantaCruzOperation Systems Test equipment: The following procedure was confirmed with the following system and drive combination: Host: OS: Target: PC-UNIX_SCO UnixWare 2.1, UnixWare 7 RMO-S551 Installation: 1) Hardware Installation - Attach the drive to the system using a SCSI cable. - Set proper SCSI ID and termination. - Set proper Functional Switch.
SMO-F551 / RMO-S551 Installation Guide Appendix OS 4.1GB media 4.8GB media 5.2GB media OS 4.1GB media 4.8GB media 5.2GB media Capacity 4.1GB 4.8GB 5.2GB DOS Window3.1 Windows95/98 WindowsNT O O O O O*1 O*1 O*1 O*1 O*1 O*1 O*1 O*1 Table 1. Media support table-1 *1: with using Formatter One Pro SUN Systems SGI Systems HP Systems O O O X X O X X O Table 2. Media support table-2 Name Sector Size EDM-4100 512 Byte/sector EDM-4800 1024 Byte/sector EDM-5200 2048 Byte/sector Table 3.
