4-236-327-11(2) Remote Commander Operating Instructions Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. RM-PP505 © 2001 Sony Corporation Serial No.
Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On operation Before connecting other components, be sure to turn off and unplug the receiver. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
Before you use your remote Check that you received the following item with the remote: R6 (size-AA) batteries (2) Inserting batteries into the remote Insert two R6 (size-AA) batteries with the + and – properly oriented in the battery compartment. When using the remote, point it at the remote sensor on the receiver. Table of Contents Location of Parts and Basic Remote Operations Parts description .................................... 4 Table of buttons that you can use to control each component ............
Location of Parts and Basic Remote Operations 1 Function buttons This chapter provides information on the location of buttons and how to use them to perform basic operations. However, some functions explained in this section may not work depending on the model of the receiver. For the functions of the receiver you purchased, refer to the Operating Instructions supplied with the receiver.
2 Remote mode buttons Press to select the mode of the remote (page 13). 3 INPUT MODE button Press to select the input mode. 4 AUDIO SPLIT button 5 SOUND FIELD buttons A.F.D. button Press to set the receiver to automatically select the appropriate sound field for the input signal. This button can be used only with receivers that have digital inputs. MODE +/– button Press to select sound fields. 2CH button Press to turn the sound field off and listen to 2 channel stereo sound.
Parts description (continued) wl wk AV ? / 1 SLEEP USE MODE VIDEO 1 AUX MONITOR VIDEO 2 VIDEO 3 MD/TAPE CD/SACD AV1 AV2 1 2 ?/1 SYSTEM STANDBY qg DVD/LD TV/SAT TUNER PHONO 3RD qg AV ?/1 switch Note 2ND ROOM The function of the AV ?/1 switch changes automatically each time you press the function buttons (1). Depending on the component, the above operation may not be be possible or may operate differently than described.
wa Cursor buttons (U/u/I/i), ENTER/ EXEC button After pressing the MAIN MENU, AV MENU, or TITLE/GUIDE button, use the cursor buttons to make specific settings, then press the ENTER/EXEC button to enter the selection. Press to display DVD titles or guide menus. wd AV DISPLAY button Press to select the information displayed on the TV screen. wf Operation buttons* The following table describes the component operated by each button and the function of the buttons.
Parts description (continued) e; Numeric buttons (1 to 0)* Press to select channel numbers. ea JUMP button TV operation After pressing the MONITOR button, the button lights up and you can use the following buttons to operate TV. Press to toggle between the previous and the current channels. es POSITION button Press to change the position of the small picture**.
Table of buttons that you can use to control each component Component CD player DAT deck MD deck Tape LD deck player (A and B) AV ?/1 z z z Numeric buttons z z z z SHIFT >10 z z z VCR TV Satellite Video tuner/ CD Cable box player DVD player z z z z z z z z z z z z z z z Button(s) z z VOL – O (Return) N z z z z z z z z z z z z z z z z z z z VOL + X z z z MUTING x z z z z z z z .
Advanced Remote Operations This chapter describes how to change the factory setting of a function button and how to set the remote to control non-Sony components. 4 Press ENTER. Once the numeric code has been verified, the indicator slowly flashes twice and the remote automatically exits the programming mode. 5 Repeat steps 1 to 4 to control other Programming the remote components. To cancel programming You can program the remote to control nonSony components by changing the code.
The numeric codes corresponding to the component and the maker of the component Maker Code(s) SONY 203 PIONEER 219 To control an MD deck Maker Code(s) SONY 301 DENON 302 JVC 303 KENWOOD 304 Notes To control a tape deck • The numeric codes are based on the latest information available for each brand. There is a chance, however, that your component will not respond to some or all of the codes.
Programming the remote (continued) To control a VCR Maker Code(s) SONY 701, 702, 703, 704, 705, 706 AIWA 710, 750, 757, 758 AKAI 707, 708, 709, 759 BLAUPUNKT 740 EMERSON 711, 712, 713, 714, 715, 716, 750 Maker Code(s) SONY 501 DAEWOO 504, 505, 506, 507, 515, 544 FISHER 508 GOLDSTAR 503, 511, 512, 515, 534, 544 GRUNDIG 517, 534 HITACHI 513, 514, 515, 544 ITT/NOKIA 521, 522 JVC 516 MAGNAVOX 503, 518, 544 GENERAL ELECTRIC 721, 722, 730 MITSUBISHI/MGA 503, 519, 544 GOLDSTAR 7
Selecting the mode of the remote To check the mode of the remote Press USE MDOE. You can check the remote by the indicator. Indicator lights AV1 once AV2 twice Selecting the command mode 2nd room once (for a while) You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. 3rd room 3 times Press 1 (AV1) (or 2 (AV2)) while pressing down USE MODE.
Additional Information Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. The remote does not function. • Check the mode of the remote (page 13). on the • Point the remote at the remote sensor receiver. • Remove any obstacles in the path between the remote and the receiver.
Advanced Remote Operations 15
Sony Corporation Printed in Malaysia
