filename[C:\NORMAN\SONY HA\STR-DG1200\3289135111\3289135111STRDG1200CEL\00COVSTRDG1200CEL\010COV.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\020REG.fm3-289-135-11(1) masterpage: Left WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\020REG.fm masterpage: Right CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\020REG.fm3-289-135-11(1) masterpage: Left This product is manufactured under license from Neural Audio Corporation and THX Ltd. Sony Corporation hereby grants the user a non-exclusive, non-transferable, limited right of use to this product under USA and foreign patent, patent pending and other technology or trademarks owned by Neural Audio Corporation and THX Ltd.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\010COVTOC.fm masterpage: Right Table of Contents Getting Started Enjoying Surround Sound Description and location of parts ................. 7 1: Installing the speakers ............................ 13 2: Connecting the speakers ........................ 15 3: Connecting the TV ................................. 17 4a: Connecting the audio components ....... 18 4b: Connecting the video components ....... 23 5: Connecting the antennas .....
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\010COVTOC.fm masterpage: Left Other Operations Converting analog video input signals .......88 Enjoying the sound/images from the components connected to the DIGITAL MEDIA PORT .......................................89 Naming inputs ............................................92 Switching between digital and analog audio (INPUT MODE) ....................................93 Enjoying the sound/images from other inputs ........................
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right Getting Started Getting Started Description and location of parts Front panel To remove the cover Press PUSH. When you remove the cover, keep it out of reach from children. Status of the POWER button Off The receiver is turned off (the ON/ STANDBY lamp lights off) (initial setting). Press POWER to turn the receiver on. You cannot turn the receiver on using the remote.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left Name Function Name Function A POWER Press to turn the receiver on or off. I INPUT MODE Press to select the input mode when the same components are connected to both digital and analog jacks (page 93). J MASTER VOLUME Turn to adjust the volume level of all speakers at the same time. K INPUT SELECTOR Turn to select the input source to play back.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right Rear panel Getting Started A DIGITAL INPUT/OUTPUT section B ANTENNA section OPTICAL IN/ Connects to a DVD OUT jacks player, Super Audio CD player, etc. The COAXIAL IN COAXIAL jack provides a better jacks sound quality (page 17, 19, 26, 27). FM ANTENNA Connects to the jack supplied FM wire antenna (page 33). AM ANTENNA jack Connects to the supplied AM loop antenna (page 33).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm D SPEAKERS section Remote commander Connects to speakers (page 15). E AUDIO INPUT/OUTPUT section White (L) AUDIO IN/ OUT jacks Connects to a tape deck or MD deck, etc. (page 17, 19, 22). MULTI CHANNEL INPUT jacks Connects to a Super Audio CD player or DVD player with an analog audio jack for 7.1 channel or 5.1 channel sound (page 21). Red (R) Black AUDIO OUT jack Connects to a subwoofer.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm Function A AV ?/1 (on/ standby) Press to turn on or off the audio/ video components that the remote is assigned to operate (page 115). To turn the TV on or off, press TV (X), then press AV ?/1. If you press the ?/1 (B) at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY). Note The function of the AV ?/1 switch changes automatically each time you press the input button (D).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left Name Function Name Function H GUI MODE Press to display the menu on the TV screen to operate the receiver. O MUTING I Press V/v/B/b to select the menu items. Then press to enter the selection. Press to turn off the sound temporarily. Press MUTING again to restore the sound. Press TV(X), then press MUTING to activate the TV’s muting function.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm Function W SHIFT Press to light up the button to activate the buttons with pink printing. X TV Press to light up the button to enable TV operation (buttons with yellow printing). Y THEATER Press to enjoy optimal image suited for movies and to output the sound from the speakers connected to this receiver automatically. Note This button will only function if your TV is compatible with Theater Mode.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm You can enjoy high fidelity reproduction of DVD software recorded sound in the Surround EX format if you connect one additional surround back speaker (6.1 channel system) or two surround back speakers (7.1 channel system). masterpage: Left Tips • The angle A should be the same. Example of a 7.1 channel speaker system configuration • When you connect a 6.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right 2: Connecting the speakers Getting Started Before connecting the cords, be sure to disconnect the AC power cord.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left a) If you have an additional front speaker system, connect them to the SPEAKERS FRONT B terminals. You can select the front speaker system you want to use with SPEAKERS (OFF/A/B/A+B) on the front panel (page 40). b) If you connect only one surround back speaker, connect it to the SPEAKERS SURROUND BACK L terminals.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right 3: Connecting the TV It is not necessary to connect all the cords. Connect the audio and video cords according to the jacks of your components. Before connecting the cords, be sure to disconnect the AC power cord.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left Notes • Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. • Depending on the status of the connection between the TV and the antenna, the image on the TV screen may be distorted. In this case, place the antenna farther away from the receiver.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right Getting Started Connecting components with digital audio input/output jacks The following illustration shows how to connect a Super Audio CD player, CD player, an MD deck and DIGITAL MEDIA PORT adapter.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left Notes on connecting a DIGITAL MEDIA PORT adapter • When connecting the DIGITAL MEDIA PORT adapter, be sure the connector is inserted with the arrow mark facing towards the arrow mark on the DMPORT jack. • Be sure to make DMPORT connections firmly, insert the connector straight in. • As the connector of the DIGITAL MEDIA PORT adapter is fragile, be sure to handle with care when placing or moving the receiver.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right Getting Started Connecting components with multi channel output jacks If your DVD player, Blu-ray disc player or Super Audio CD player is equipped with multi channel output jacks, you can connect them to the MULTI CHANNEL INPUT jacks of this receiver to enjoy multi channel sound. Alternatively, the multi channel input jacks can be used to connect an external multi channel decoder.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left Connecting components with analog audio jacks The following illustration shows how to connect a component with analog jacks, such as a tape deck, turntable, etc. MD deck, Tape deck Turntable A A A Super Audio CD player, CD player A Audio cord (not supplied) Note If your turntable has a ground (earth) wire, connect it to the (U) SIGNAL GND terminal.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right 4b: Connecting the video components Video input/output jacks to be connected This section describes how to hook up your components to this receiver. Before you begin, see “Component to be connected” below for the pages which describe how to connect each component. Before connecting the cords, be sure to disconnect the AC power cord.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm Connecting components with HDMI jacks HDMI is the abbreviated name for HighDefinition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. HDMI features • A digital audio signal transmitted by HDMI can be output from the speakers connected to this receiver. This signal supports Dolby Digital, DTS, and Linear PCM.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm Notes on connecting cables Notes on HDMI connections • An audio signal input to the HDMI IN jack is output from the speaker output jacks and HDMI OUT jack. It is not output from any other audio jacks. • A video signal input to the HDMI IN jack can only be output from the HDMI OUT jack. The video input cannot be output from the VIDEO OUT jacks or MONITOR OUT jacks.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left Note Connecting a DVD player The following illustration shows how to connect a DVD player. It is not necessary to connect all the cords. Connect the audio and video cords according to the jacks of your components. To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm Connecting a Blu-ray disc player Note To input multi channel digital audio from the Bluray disc player, set the digital audio output setting on the Blu-ray disc player. Refer to the operating instructions supplied with the Blu-ray disc player.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left Connecting a satellite tuner, set-top box The following illustration shows how to connect a satellite tuner or set-top box. It is not necessary to connect all the cords. Connect the audio and video cords according to the jacks of your components.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right The following illustration shows how to connect a component which has analog jacks such as a DVD recorder, VCR, etc. DVD recorder, VCR Audio signals Video signals A B (On the front panel) Camcorder, video game C A Audio cord (not supplied) B Video cord (not supplied) C Audio/video cord (not supplied) 29US STR-DG1200 3-289-135-11(1) Getting Started It is not necessary to connect all the cords.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm Function for conversion of video signals This receiver is equipped with a function for converting video signals. You can output the video signal after connecting this receiver via the MONITOR OUT or HDMI OUT jack as shown in the illustration. masterpage: Left • Video signals can be up-converted as HDMI video and component video signals. • Component video signals can be output as HDMI video and video signals.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right To display Closed Caption • When video signals from a VCR, etc., are converted on this receiver and then output to your TV, depending on the status of the video signal output, the image on the TV screen may appear distorted horizontally or no image may be output. • HDMI video signals cannot be converted to component video signals and video signals.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left In the video input/output conversion table classified by the menu settings For details on “Resolution” menu setting, see “Settings for the video (Video settings menu)” (page 54) and on operating, see “Converting analog video input signals” (page 88).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Right 5: Connecting the antennas Getting Started Connect the supplied AM loop antenna and FM wire antenna. Before connecting the antennas, be sure to disconnect the AC power cord. FM wire antenna (supplied) AM loop antenna (supplied) Notes • To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. • Be sure to fully extend the FM wire antenna.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm 6: Preparing the receiver and the remote Connecting the AC power cord Connect the AC power cord to a wall outlet. Note Before connecting the AC power cord, make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. masterpage: Left Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm Insert two R6 (size-AA) batteries in the RMAAL019 Remote Commander. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm To switch the command mode of the RM-AAL019 remote 1 SHIFT 2 1 THEATER SHIFT TV AMP 1 2 3 VIDEO1 VIDEO2 BD DVD 4 5 6 WIDE SAT TV MD/ TAPE 7 8 9 TUNER PHONO -/-- 0/10 HDMI1 HDMI2 XM SIRIUS 2CH/ A.DIRECT A.F.D. INPUT RESOLUTION MODE MULTI IN SA-CD/ CD D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm 3 Press GUI MODE repeatedly. 4 Press V/v repeatedly to select a menu you want, then press or b. Settings You can use the Settings menu to set and adjust this receiver. Auto Calibration You can use the Auto Calibration settings menu to adjust the speakers automatically. For details, see “9: Calibrating the appropriate speaker settings automatically (Auto Calibration)” (page 41).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm System For details on adjusting the system using the System settings menu, see “Settings for the system (System settings menu)” (page 55). 3 Press menu. masterpage: Left or b to enter the The menu item list appears on the TV screen. Navigating through menus using the GUI 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm 7 Press to enter the parameter. masterpage: Right 8: Setting the speakers Set the appropriate speaker impedance for the speakers you are using. 2CH/ A.DIRECT 8 Press V/v repeatedly to select the setting you want. 9 Press A.F.D. MOVIE MUSIC INPUT RESOLUTION MODE SLEEP NIGHT MODE GUI MODE to enter the setting. To return to the previous screen HOME MENU Press RETURN/EXIT O. To exit the menu 1 2-5 1 Press MENU.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm 4 Press V/v repeatedly to select “Impedance”, then press . masterpage: Left Selecting the front speakers You can select the front speakers you want to drive. SPEAKERS (OFF/A/B/A+B) 5 Press V/v repeatedly to select “4 Ω” or “8 Ω” depending on the speakers you are using, then press . Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the front speaker system you want to drive.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm (Auto Calibration) The DCAC (Digital Cinema Auto Calibration) function allows you to perform automatic calibration as follows: • Check the connection between each speaker and the receiver.a) • Measure the polarity of speakers. • Measure the distance of each speaker from your seating position automatically.a) • Measure the speaker size.a) • Adjust the speaker level. • Measure the frequency characteristics.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm Optimizer microphone masterpage: Left On setting up the active subwoofer • When a subwoofer is connected, turn on the subwoofer and turn up the volume beforehand. Turn the MASTER VOLUME knob to just before the mid-point. • If you connect a subwoofer with the crossover frequency function, set the value to maximum. • If you connect a subwoofer with an auto standby function, set it to off (deactivated).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm 5 Performing Auto Calibration A.F.D. MOVIE MUSIC INPUT RESOLUTION MODE SLEEP NIGHT MODE GUI MODE HOME 1 • Speaker Distance • Speaker Level • Frequency Characteristic 1 2-7 MENU Press GUI MODE repeatedly to select “GUI ON”. “GUI MODE” appears in the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm 9 Measurement starts. The measurement process will take approximately 30 seconds with a test tone. Wait until the measurement process completes. masterpage: Left Confirming/saving the measurement results 1 Confirm the measurement result. When the measurement ends, a beep sounds and the measurement result appears on the TV screen.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm 2 Press to select “Next”. masterpage: Right Explanation When “Save auto calibration (auto speaker setup) results?” appears on the TV screen, you can select whether to confirm the warning (“Yes”) or not (“No”). Follow the instructions of the TV screen when you select “Yes”. For details on warning and error codes, see “Message list after Auto Calibration measurement” (page 46).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\030CON.fm masterpage: Left Message list after Auto Calibration measurement Explanation Message appears in GUI menu [Display window] Error Code: 31 [E-xxx: 31]* SPEAKERS (OFF/A/B/A+B) is set to off. Set it to others and perform the measurement again. Error Code: 32 [E-xxx: 32]* None of the speakers were detected. Make sure that the optimizer microphone is connected properly and perform the measurement again.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\040PLA.fm To set Auto Calibration items more precisely (Enhanced Setup) Playback Selecting a component Playback On the Auto Calibration menu, select “Enhanced Setup”, then press . • Seating Position You can register three patterns as position 1, 2, and 3, depending on the seating position, listening environment, and measurement conditions. • Calibration Type For details, see the table on page 45.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\040PLA.fm Selected input Components that can be played back VIDEO 2 Camcorder and video game, etc., connected to the VIDEO 2 IN/PORTABLE AV IN jack. BD Blu-ray disc player, etc., connected to the BD jack. DVD DVD player, etc., connected to the DVD jack. SAT Satellite tuner, etc., connected to the SAT jack.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\040PLA.fm masterpage: R-2 Listening to a Super Audio CD/CD THEATER SHIFT TV AMP 1 2 3 VIDEO1 VIDEO2 BD DVD 4 5 6 WIDE SAT TV 8 PHONO -/-- 0/10 HDMI1 HDMI2 MD/ TAPE 9 MULTI IN SA-CD/ CD D.TUNING DMPORT 2 3 Playback 7 TUNER TV INPUT ENT/MEM CLEAR HDMI3 HDMI4 XM SIRIUS 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\040PLA.fm masterpage: L-2 Watching a DVD/Blu-ray Disc THEATER SHIFT TV AMP 1 2 3 VIDEO1 VIDEO2 BD DVD 4 5 6 WIDE SAT TV 7 8 TUNER PHONO -/-- 0/10 HDMI1 HDMI2 MD/ TAPE 9 MULTI IN TV INPUT SA-CD/ CD 2 3 D.TUNING DMPORT ENT/MEM CLEAR HDMI3 HDMI4 XM SIRIUS 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\040PLA.fm masterpage: R-2 Enjoying video games THEATER SHIFT TV AMP 1 2 3 VIDEO1 VIDEO2 BD DVD 4 5 6 WIDE SAT TV 8 PHONO -/-- 0/10 HDMI1 HDMI2 MD/ TAPE 9 MULTI IN SA-CD/ CD D.TUNING 2 3 DMPORT Playback 7 TUNER TV INPUT ENT/MEM CLEAR HDMI3 HDMI4 XM SIRIUS 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\040PLA.fm masterpage: L-2 Watching video THEATER SHIFT TV AMP 1 2 3 VIDEO1 VIDEO2 BD DVD 4 5 6 WIDE SAT TV 7 8 TUNER PHONO -/-- 0/10 HDMI1 HDMI2 MD/ TAPE 9 MULTI IN TV INPUT SA-CD/ CD D.TUNING 2 3 DMPORT ENT/MEM CLEAR HDMI3 HDMI4 XM SIRIUS 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\050AMP.fm Amplifier Operations Settings for the audio (Audio settings menu) Audio settings menu parameters x A/V Sync (Synchronizes audio and video output) x Decode Priority (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the HDMI IN jacks. • PCM When signals from the HDMI IN jack are selected, only PCM signals are output from the connected player.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\050AMP.fm masterpage: Left Settings for the video Settings for HDMI (HDMI (Video settings menu) settings menu) You can use the Video settings menu to make settings for video. Select “Video” in the Settings menu. For details on adjusting the parameters, see “7: Operating the receiver using the GUI (Graphical User Interface)” (page 36).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\050AMP.fm • AMP The HDMI audio signals from the playback component is only output to the speakers connected to the receiver. The multi channel sound can be played back as it is. Note Audio signals are not output from the TV’s speakers when “Audio Out” is set to “AMP”. Lets you set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\060SUR.fm 5 Press V/v repeatedly to select “Sound Field Setup”, then press . 6 Press V/v repeatedly to select the sound field you want. Enjoying Surround Sound Enjoying a preprogrammed sound field 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT RESOLUTION MODE SLEEP NIGHT MODE GUI MODE masterpage: Left 2 3-6 HOME MENU 1 2 Start playing a sound source you want to listen to (CD, DVD, etc.).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\060SUR.fm masterpage: Right Types of 2CH mode x 2ch Stereo The receiver outputs the sound from the front left/right speakers only. There is no sound from the subwoofer. Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channel except LFE signals. Note Enjoying Surround Sound No sound is output from the subwoofer in the 2ch Stereo mode.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\060SUR.fm masterpage: Left When connecting Blu-ray disc players and other next generation HD players This receiver supports the following audio formats. Audio format Maximum number of channels Connection of the playback component and the receiver COAXIAL/OPTICAL HDMI 5.1ch a a 6.1ch a a 7.1ch × a 7.1ch × a DTS 5.1ch a a DTS-ES 6.1ch a a DTS 96/24 5.1ch a a DTS-HD High Resolution Audio a) 7.1ch × a 7.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\060SUR.fm masterpage: Right Types of A.F.D. mode The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound. A.F.D. mode appears in GUI menu [Display window] Multi channel audio after decoding Effect A.F.D. Auto [A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\060SUR.fm masterpage: Left Notes If you connect a subwoofer • This function does not work in the following cases. – The multi channel input is selected. – DTS-HD signals with a sampling frequency of more than 48 kHz are being received. – Dolby TrueHD signals with a sampling frequency of more than 48 kHz are being received. – PCM signals with a sampling frequency of more than 96 kHz are being received.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\060SUR.fm masterpage: Right Types of music/movie mode You can take advantage of surround sound simply by selecting one of the receiver’s preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. Sound field appears in GUI menu [Display window] Effect Movie Cinema Studio EX A [C.ST.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\060SUR.fm masterpage: Left Notes • The sound fields for music and movie do not work in the following cases. – The multi channel input is selected. – DTS-HD signals with a sampling frequency of more than 48 kHz are being received. – Dolby TrueHD signals with a sampling frequency of more than 48 kHz are being received. – PCM signals with a sampling frequency of more than 48 kHz are being received. – DTS 96/24 signals are being received.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\070SET.fm Enjoying the surround effect at low volume levels (NIGHT MODE) This function allows you to retain a theater like environment at low volume levels. This function can be used with other sound fields. When watching a movie late at night, you will be able to hear the dialog clearly even at a low volume level. 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\070SET.fm 4 Press V/v repeatedly to select “Manual Setup”, then press . masterpage: Left x Distance (Distance from the seating position to each speaker) You can adjust the distance from the seating position to each speaker (front left/right, center, surround left/right, surround back left/ right, subwoofer). You can adjust the distance from 3 feet 3 inches to 32 feet 9 inches (1.00 meter to 10.00 meters) in 1 inch (0.01 meter) steps.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\070SET.fm • SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the bass frequencies of each channel from the subwoofer or other “LARGE” speakers. masterpage: Right Making settings with the Speaker Pattern menu 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\070SET.fm 5 Press V/v repeatedly to select the speaker pattern you want. 4 Press V/v repeatedly to select “Test Tone”, then press . 5 Press B/b repeatedly to select the test tone type, then press . 6 Press V/v repeatedly to select the speaker you want to adjust, then press . Making settings with the Test Tone menu 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\070SET.fm Test Tone menu parameters masterpage: Right Other menu parameters of Speaker settings x Test Tone (Test Tone) • OFF • AUTO The test tone is output from each speaker in sequence. • L, C, R, SR, SB, SBR, SBL, SL, SW You can select which speakers will output the test tone. Some items may not be displayed, depending on the setting of the speaker pattern.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\070SET.fm x D. Range Comp (Dynamic range compressor) Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only. • OFF The dynamic range is not compressed. • AUTO The dynamic range is applied automatically with Dolby TrueHD sources and is set to “OFF” with other sources.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm 3 Press V/v repeatedly to select “EQ”, then press . masterpage: Right Tuner Operations Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (page 33). Tip 4 Press B/b repeatedly to select the speaker you want to adjust, then press .
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm 3 Press V/v to select “Auto Tuning”, then press or b. masterpage: Left Direct tuning Enter the frequency of a station directly by using the numeric buttons. THEATER 4 4 Press V/v. SHIFT TV 1 2 3 VIDEO1 VIDEO2 BD DVD 4 5 6 WIDE SAT TV MD/ TAPE 7 8 9 TUNER PHONO -/-- 0/10 Press V to scan from low to high, press v to scan from high to low. The receiver stops scanning whenever a station is received.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm 4 Press SHIFT, then press the numeric buttons to enter the frequency, then press . Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 masterpage: Right Presetting radio stations You can preset up to 30 FM and 30 AM stations. Then you can easily tune in the stations you often listen to. 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm 8 Repeat steps 3 to 7 to preset another station. To tune to preset stations 1 Repeat steps 1 and 2 of “Presetting radio stations”. 2 Press V/v to select the preset station you want. You can select a preset station as follows: • AM band AM 1 to AM 30 • FM band FM 1 to FM 30 To name preset stations 1 Select a preset station you want to name. 2 Press OPTIONS, then select “Name Input”.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm XM Ready® Subscriptions Once you have installed the XM Mini-Tuner Dock, inserted the XM Mini-Tuner, connected the XM Mini-Tuner Home Dock to your XM Ready® audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming. There are three places to find your eight character XM Radio ID: On the XM Mini-Tuner, on the XM MiniTuner package, and on XM Channel 0.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm To connect to the SIRIUS jack Connect the SiriusConnect Home tuner. When you use the SiriusConnect Home tuner with this receiver, be sure to connect the AC power adaptor supplied with the tuner to a wall outlet. Keep the SiriusConnect Home tuner, antenna, and AC power adaptor away from the speaker cords and the power cord to avoid picking up noise.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm Checking the XM Radio ID or SIRIUS ID number 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT RESOLUTION MODE SLEEP NIGHT MODE GUI MODE HOME 3 masterpage: Right Press OPTIONS, then press V/v repeatedly to select “Radio ID” or “Sirius ID”, then press . XM 1 2-3 3 MENU 1 SIRIUS Press GUI MODE repeatedly to select “GUI ON”. “GUI MODE” appears in the display window of the receiver and the GUI menu appears on the TV screen.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm Selecting a channel by Category Mode 3 A.F.D. MOVIE MUSIC INPUT RESOLUTION MODE SLEEP NIGHT MODE GUI MODE Press V/v repeatedly to select the category, then press . • ALL: You can select a channel from all the categories. • (category name): You can select a channel from one category. You can select a channel from one category or all the categories. 2CH/ A.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm Selecting a channel by inputting the channel number directly THEATER 5 SHIFT TV 1 2 3 VIDEO1 VIDEO2 BD DVD 4 5 6 WIDE SAT TV MD/ TAPE 7 8 9 TUNER PHONO MULTI IN -/-- 0/10 HDMI1 HDMI2 Presetting the channels You can select the channels you want directly by presetting them using the preset numbers. You can preset up to 30 XM Radio channels and 30 SIRIUS Satellite Radio channels. AMP 2CH/ A.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm 6 Press V/v repeatedly to select the preset channel you want to use as the preset channel, then press . Preset channels from 1 to 30 are available, and a default channel is preset for all the preset channels when you purchase the receiver. The selected channel is registered as the preset channel you selected in step 3.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm 4 Press OPTIONS, then press V/v to select “Parental Lock”, then press or b. masterpage: Right To change the lock code 1 Press V/v repeatedly to select “SIRIUS”, then press or b. 2 Press OPTIONS, then press V/v to select “Lock Code”, then press . “Enter your 4-digit lock code.” appears. 3 Press SHIFT, then press the numeric buttons to enter your 4-digit lock code. “Enter a new lock code.” appears.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm masterpage: Left To cancel the Parental Lock 1 Press V/v repeatedly to select “SIRIUS”, then press or b. 2 Tune in the channel you want to unlock using “Direct Tuning” (page 77). 3 Press OPTIONS, then press V/v to select “Parental Lock”, then press or b. 4 Press V/v repeatedly to select “OFF”, then press . “Enter your 4-digit lock code.” appears. 5 Press SHIFT, then press the numeric buttons to enter your 4-digit lock code.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm masterpage: Right XM Radio message list Explanation Message appears in GUI menu [Display window] Check Antenna [ANTENNA] Remedies The XM antenna is not connected to the Check that the XM antenna is connected to the XM Mini-Tuner and Home Dock or the XM Mini-Tuner and Home Dock securely and XM antenna cable is damaged. check the antenna cable for damage. Replace the XM antenna if the cable is damaged.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\080TUN.fm masterpage: Left SIRIUS Satellite Radio message list Explanation Message appears in GUI menu [Display window] Antenna Error [ANTENNA] Remedies The antenna is not connected properly. Check the connection between the SiriusConnect Home tuner and the antenna. Acquiring Signal The receiving condition is not good. [ACQUIRING] Try moving the antenna to another location.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Control for HDMI Using the Control for HDMI function for “BRAVIA” Sync The Control for HDMI function does not work in the following cases: • When you connect the receiver to a component which does not correspond with Sony Control for HDMI function. • When you connect the receiver and components using other than HDMI connection. We recommend that you connect the receiver to products featuring “BRAVIA” Sync.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm To enjoy TV multi channel surround sound broadcasting Connecting a TV and other components You can listen to TV multi channel surround sound broadcasting from the speakers connected to the receiver. Connect the OPTICAL output jack of the TV to the OPTICAL IN jack of the receiver. Before connecting the cords, be sure to disconnect the AC power cord.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Right 5 Set the Control for HDMI function for the Preparing Control for HDMI function Notes • If you unplug and reconnect the HDMI cable, be sure to repeat steps 1 to 6 above. • You cannot perform One-Touch Play and System Audio Control during the Control for HDMI-Easy Setting operation. • Before you do the Control for HDMI-Easy Setting from the TV, be sure to turn on the TV, connected components and receiver.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm To set Control for HDMI 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT RESOLUTION MODE SLEEP NIGHT MODE GUI MODE Watching a DVD (One-Touch Play) 1 2-5 MENU Press GUI MODE repeatedly to select “GUI ON”. “GUI MODE” appears in the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Right Notes Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) Control for HDMI You can enjoy the TV sound from the speakers connected to the receiver by a simple operation. You can operate System Audio Control function using the TV menu. For details, refer to the operating instructions of the TV.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Turning off the receiver with the TV (System Power Off) When you turn the TV off by using the POWER button on the TV’s remote, the receiver and the connected components turn off automatically. You can also use the receiver’s remote to turn off the TV. masterpage: Left Other Operations Converting analog video input signals This receiver allows you to convert the resolution of analog video input signals. 2CH/ A.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Enjoying the sound/ images from the components connected to the DIGITAL MEDIA PORT The DIGITAL MEDIA PORT (DMPORT) allows you to enjoy sound from a network system such as a portable audio/video source or computer. By connecting a DIGITAL MEDIA PORT adapter, you can enjoy sound and image from the connected component on the receiver.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm 3 Press or b. The component connected to the DIGITAL MEDIA PORT adapter is recognized and “DMPORT” on the TV screen will change to the component’s name. The category of the component connected to DIGITAL MEDIA PORT adapter appears on the TV screen.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm To operate the TDM-iP1/iP50 or TDM-NC1 using the adapter menu Make sure that “Adapter GUI” is selected in step 5 in “Selecting an operation screen to operate the component connected to the DIGITAL MEDIA PORT adapter” (page 89). For details on operating the adapter using the adapter GUI menu, refer to the operating instructions supplied with the adapter you are using.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Left x Shuffle (TDM-iP1 only) Plays all the tracks in random order. • Off Deactivates the shuffle play mode. • Albums Plays all the tracks on an album in random order. • Songs Plays all the tracks in “Songs” in random order. Naming inputs You can enter a name of up to 8 characters for inputs and display it. This is convenient for labeling the jacks with the names of the connected components. 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Right Audio input modes Switching between digital and analog audio (INPUT MODE) When you connect components to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch. • AUTO Gives priority to digital audio signals when there are both digital and analog connections.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Enjoying the sound/ images from other inputs You can reassign video and/or audio signals to another input. Example: Connect the OPTICAL OUT jack of the DVD player to the OPTICAL VIDEO 1 IN jack of this receiver when you want to input only the digital optical audio signals from the DVD player.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Left FM and AM band Changing the display window Station name* t Frequency t Sound field type t Volume level You can check the sound field, etc., by changing the information on the display window. 2CH/ A.DIRECT A.F.D.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Right About the indicators on the display window LFE SW L C SL S SR R COAX OPT D + EX TrueHD Neural - THX DTS - ES 96/ 24 D.RANGE CAT MULTI IN DTS - HD MSTR HI RES NEO:6 PL ll X MEM MONO HDMI DMPORT ANALOG LPCM EQ Bl - AMP XM SIRIUS SP A + B SLEEP ST A.DIRECT SB L SB SB R Function Name Function A SW Lights up when subwoofer is connected and the audio signal is output from the SUBWOOFER jack.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Left Name Function Name Function G DTS/ DTS-ES/ DTS 96/24 “DTS” lights up when the receiver is decoding DTS signals. “DTS-ES” lights up when the receiver is decoding DTS-ES signals. “DTS 96/24” lights up when the receiver is decoding DTS 96 kHz/24 bit signals. P XM Lights up when XM MiniTuner and Home Dock are connected and “XM RADIO” is selected.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Right Function Name Function Lights up when – INPUT MODE is set to “AUTO” and no digital signal is being input through the COAXIAL, OPTICAL or HDMI jacks. – INPUT MODE is set to “ANALOG”. – the “2ch Analog Direct” is being used. wj Playback channel indicators The letters (L, C, R, etc.) indicate the channels being played back.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Using the sleep timer Recording using the receiver You can set the receiver to turn off automatically at a specified time. 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT RESOLUTION MODE SLEEP NIGHT MODE masterpage: Left SLEEP GUI You can record from a video/audio component using the receiver. Refer to the operating instructions supplied with your recording component. Press SLEEP repeatedly.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm 3 Prepare the recording component. Insert a blank MD or tape into the recording deck and adjust the recording level. 4 Start recording on the recording deck, then start playback on the playback component. Recording onto a recording media 1 2 Prepare the component for playing. For example, insert the video tape you want to copy into the VCR. 3 Prepare the recording component. Insert a blank video tape, etc.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Left To set up the speakers Using a bi-amplifier connection If you are not using the surround back speakers, you can use the SURROUND BACK SPEAKERS terminals for the front speakers in a bi-amplifier connection. To connect the speakers Front speaker (R) Front speaker (L) Hi Hi Lo Lo Set “Sur Back Assign” to “BI-AMP” in the Speaker settings menu.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Operating without connecting to the TV You can operate this receiver using the display window if you do not use a GUI when a TV is not connected. Press GUI MODE repeatedly to select “GUI OFF”. When “GUI MODE” is displayed in the display window, the menu is set to display on the TV screen using a GUI. Navigating through menus on the display window masterpage: Right 4 Press menu.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Left Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 103. Menu [Display Parameters window] [Display window] Settings Initial setting Calibration type [CAL TYPE] FULL FLAT, ENGINEER, FRONT REF, OFF FULL FLAT Position [POSITION] POS 1, POS 2, POS 3 POS 1 Naming inputs [NAME IN] For details, see “Naming inputs” (page 92).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Right Menu [Display Parameters window] [Display window] Settings Initial setting SPEAKER [] Speaker pattern [SP PATTERN] 3/4.1, 3/4, 3/3.1, 3/3, 2/4.1, 2/4, 3/2.1, 3/2, 2/3.1, 2/3, 2/2.1, 2/2, 3/0.1, 3/0, 2/0.1, 2/0 3/4.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Menu [Display Parameters window] [Display window] Settings SURROUND Sound field selection [] [S.F. SELECT] For details, see “Enjoying Surround Sound” (page 56). EQ [] TUNER [] AUDIO [
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm masterpage: Right Menu [Display Parameters window] [Display window] Settings Initial setting VIDEO [
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Performing Auto Calibration For details on the Auto Calibration, see “9: Calibrating the appropriate speaker settings automatically (Auto Calibration)” (page 41). See “Before you perform the Auto Calibration” (page 41) before performing the Auto Calibration. To operate on the receiver 1 Press GUI MODE repeatedly to select “GUI OFF”. 2 Press AMP. Receiver operation is enabled. 3 Press MENU.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm 4 Press V/v repeatedly to select the Auto Calibration type, then press . Auto Calibration type Explanation FULL FLAT Makes the measurement of frequency from each speaker flat. ENGINEER Sets the frequency characteristics to a set that matches that of the Sony listening room standard. FRONT REF Adjusts the characteristics of all the speakers to match the characteristics of the front speaker.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm 4 Press V/v repeatedly to select “E.SUR MODE”, then press or b. 5 Press V/v repeatedly to select the Presetting radio stations 1 Enhanced Surround mode you want, then press . Listening to the sound without any adjustment (ANALOG DIRECT) 2 3 FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING –.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm Listening to satellite tuner For details on XM/SIRIUS Radio service, see “Listening to satellite radio” (page 72) in “Tuner Operations”. Aiming the XM Antenna 1 Press XM to select “XM RADIO” or press SIRIUS to select “SIRIUS”. You can also use INPUT SELECTOR on the receiver. 2 Press AMP. 4 Press V/v repeatedly to select or b to enter the menu. 6 Press V/v repeatedly to select “XM ANT AIM” or “SR ANT AIM”.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\090OTH.fm 3 Press CATEGORY + or CATEGORY – to select the category you want. The category is selected and the channel with the lowest number in the specified category is selected. Presetting satellite tuner channels 1 4 Press TUNING + or TUNING – to select the channel. You can also press TUNING MODE on the receiver to select “AUTO”, then turn TUNING +/– to select the channel.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.fm masterpage: Right Using the Remote Operating each component using the remote When you program the remote to control the following Sony or non-Sony components, you can use the buttons on the remote that are marked with circles. Note, however, that some buttons may not operate your component. If you want to change the contents of the input list to match your particular components, see “Programming the remote” (page 115).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.fm Programming the remote You can customize the remote to match the components connected to your receiver. You can even program the remote to control nonSony components and also Sony components that the remote is normally unable to control. The procedure below uses an example in which a VCR made by a company other than Sony is connected to the VIDEO 1 IN jacks on the receiver.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.fm The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one numeric code may be assigned to a component.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.fm Performing several commands in sequence automatically masterpage: Right Program the sequence of the operation 1,5 (Macro Play) THEATER The Macro Play function lets you link several commands in a sequential order as a single command. The remote provides 2 macro lists (MACRO 1 and MACRO 2). You can specify up to 20 commands for each macro list.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.fm 3 Press the button for the operation you want to perform to learn the function as follows. Press Operations to be programmed N, x, X, M, m, ., > Performs the operation of the button. The input Switches inputs. button for more than 1 second MACRO 1 or MACRO 2 Make a one second interval. When you want to make a longer interval, press MACRO 1 or MACRO 2 repeatedly.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.fm Setting remote control codes that are not stored in the remote Even if a remote control code is not one of the presets stored in the remote, it is possible for the remote to learn the code using the learning function. 3 4 When setting up the receiver to learn the remote command modes, replace the batteries with new ones. 2,3 While the second remote is receiving the signal, the input button selected in step 2 turns off.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\100REM.fm Using a command that has been learned When selecting a learned input, press the button used to learn that function. masterpage: Left Clearing all the contents of the remote’s memory To erase the learned code 1 While holding down RM SET UP, press THEATER THEATER. 2 Press the input button (VIDEO 1 in the example) for which you want to clear the setting. The input button flashes. (The RM SET UP button remains lit.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm masterpage: Right x Crossover frequency Additional Information Glossary x Cinema Studio EX A surround sound mode that can be regarded as the compilation of Digital Cinema Sound technology, delivers the sound of a dubbing theater using three technologies: “Virtual Multi Dimensions”, “Screen Depth Matching”, and “Cinema Studio Reverberation”.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm masterpage: Left x Dolby Digital Surround EX x DTS 96/24 Acoustic technology developed by Dolby Laboratories, Inc. Surround back information is matrixed into regular left and right surround channels so that the sound can be reproduced in 6.1 channels. Active scenes, especially, are recreated with a more dynamic and realistic sound field. A high sound quality digital signal format.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm x DTS Neo:6 This technology converts 2 channels stereo recorded audio for 6 channels playback. There are two modes to select according to the playback source or your preference, CINEMA for movies, and MUSIC for stereo sources such as music.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm masterpage: Left On placement Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources • Before operating the receiver, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate on the back of the receiver.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Audio There is no sound, no matter which component is selected, or only a very low-level sound is heard. • Check that the speakers and components are connected securely.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm There is severe hum or noise. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 10 feet (3 meters) away from a TV set or fluorescent light. • Move your audio components away from the TV. • Make sure you have grounded the U SIGNAL GND terminal (only when a turntable is connected). • The plugs and jacks are dirty.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm masterpage: Right Video HDMI There is no picture or an unclear picture appears on the TV screen. • Select the appropriate input on the receiver (page 47). • Set your TV to the appropriate input mode. • Move your audio components away from the TV. • Assign the video input correctly. • The input signal should be same as input when you are up-converting an input signal with this receiver (page 30).
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm No sound is output from the receiver and TV speaker while using the System Audio Control function. • Make sure the TV is compatible with the System Audio Control function. • If the TV does not have System Audio Control function, set the “Audio Out” settings in HDMI settings menu to – “TV+AMP” if you want to listen to the sound from the TV speaker and receiver. – “AMP” if you want to listen to the sound from the receiver.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm The system cannot receive satellite channels at all. • The receiving condition is not good. Move the antenna to the place where the condition is good. • Check that you subscribed to the desired satellite radio service (see page 72). Remote control The remote does not function. • Point the remote at the remote sensor on the receiver. • Remove any obstacles in the path between the remote and the receiver.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section POWER OUTPUT Rated Power Output at Stereo Mode1) (8 ohms 20 Hz – 20 kHz, THD 0.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\110ADD.fm 5) You can change the AM tuning scale to either 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press POWER on the receiver. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: 1 Vp-p, 75 ohms COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms PB/CB: 0.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\010COVIX.fm masterpage: Left Index Symbols D U SIGNAL GND terminal 22 D. Range Comp.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\010COVIX.
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01USSTRDG1200CEL\010COVIX.
