Quick Reference Guide

Contents
81
Section Index
I. Recording, media and troubleshooting
I2. Error Messages and common problems
Restore Media: If on switching on the camera or inserting
an XQD card you see the message “Restore Media”
do not worry. This is the camera performing routine
maintenance on the card to keep the file system tidy and
free from corruption. Always allow the camera to perform
the Restore Media function. It is not an error or fault, just
housekeeping.
Execute APR: After switching the camera on you may see
a message saying “Execute APR”. This is not an error or
malfunction. The APR function minimizes the appearance
of bright or dark sensor pixels and minimizes sensor noise.
Cover/cap the lens and press SEL/SET to execute the APR
function.
If you do not perform APR you will be reminded to
perform APR the next time the camera is turned on.
You should perform APR regularly to maintain the best
possible image quality.
Audio is not being recorded: When using S&Q motion or
Interval Record audio recording is not possible.