Quick Reference Guide

Contents

Section Index

G. Slow Motion, Time-lapse and picture cache

In order to use S&Q motion the XAVC-L or XAVC-I codec

must be selected

(MENU: System – Codec).

A progressive record format must be used (p) and

the base playback rate of any slow motion footage is

determined by the selected record format

(MENU: System – Rec Format).

To enable the S&Q mode press the assignable S&Q button

or turn it on in the menu

(MENU: Recording – S&Q Motion).

The frame rate can be set either via the menu or by

pressing and holding the S&Q button until the frame rate

selection menu appears and use the handgrip joystick or

SEL/SET dial to select the desired rate.

G1.1 To shoot at more than 60fps you must enable the

High Frame Rate mode in the menu

(MENU: Recording – S&Q Motion – High Frame Rate

Mode).

There are three options, O, Full Scan and Center Scan.