Wireless stereo headset Instruction Manual CECHYA-0086 7020227
WARNING To prevent possible hearing damage, do not listen at high volume levels for long periods.
Precautions Carefully read the information in this instruction manual and on the package before using this product. Also read the instructions for the PlayStation®3 system. Retain all documentation for future reference. Safety ˎˎ Observe all warnings, precautions and instructions. ˎˎ CHOKING children. HAZARD - Contains small parts.
ˎˎ Observe all signs and instructions that require an electrical device or radio product to be switched off in designated areas, such as gas/refuelling stations, hospitals, blasting areas, potentially explosive atmospheres or aircraft. ˎˎ The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 60°C, or incinerate.
Rear R marking BassImpact™ slider BassImpact™ converts low frequency bass sounds into pulses around the earpads. To completely turn off BassImpact™, slide the BassImpact™ slider to the OFF position until it clicks. MODE button MIC MUTE button to switch MIC MUTE on and off. ˎˎ Hold down the MIC MUTE button until a beep is heard: Switch the volume of the sidetone between high and middle, or off. ˎˎ Press VOLUME slider Adjusts the volume of the headset.
Wireless adaptor Reset button IN (audio input) jack Status indicator Using the headset with the PS3™ system Compatible with PS3™ system software version 4.20 or later. Only one headset at a time can be used with the PS3™ system. 1 Insert the wireless adaptor in the USB connector. 2 Slide the POWER switch on the headset to ON.
Audio Output Selection With the wireless stereo headset you can listen to PS3™ system audio, including music, videos and games, in Virtual Surround Sound. ˋˋ You can listen to both game audio and chat audio simultaneously. Use the MIXER slider to adjust the relative volume of game audio vs. chat audio. ˋˋ You can change the audio output to the headset so that you can hear only chat audio.
Hints headset can be used with any television or monitor with a headphone jack. ˎˎ The ˎˎ The audio from the USB audio source is not output when the included audio cable is connected to the wireless adaptor. When you want to hear audio from the USB audio source, remove the audio cable from the wireless adaptor. ˎˎ Wireless adaptor needs to be connected to a powered USB port such as a PS3™ system or television USB port (if available).
Notes ˎˎ When the included audio cable is connected to the headset, the VSS (Virtual Surround Sound) ON/OFF button and the MIXER slider cannot be used. ˎˎ Output volume varies depending on the portable device that is connected. Adjust volume accordingly. ˎˎ You can use the included stereo audio cable to connect the headset to your mobile device to listen to audio content and talk on the phone.
Status indicator display Headset Indicator colour Flashing pattern Headset status Blue Solid In use Flashing once repeatedly Pairing mode Flashing twice repeatedly Connection standby mode Red Solid Charging Purple Solid Microphone input off Light green Solid Analog audio input (output) Orange Solid System software update in progress Wireless adaptor Indicator colour Flashing pattern Headset status Blue/Light green * Solid In use Flashing once repeatedly Pairing mode Flashing twic
Switching between modes You can select a mode to accompany the content you are playing. Each mode has been optimized to deliver a distinct BassImpact™ effect which enhances the overall audio experience. Switch between modes by pressing the MODE button. Each time you switch between modes, there will be voice confirmation. For further instructions, visit eu.playstation.com/ps3/support. Mode Characteristics Game BassImpact™ optimized to "Game" intensify the gaming experience.
Resetting the headset If the headset does not respond when you try to operate it, reset it by doing the following: 1 With the wireless adaptor connected to the PS3™ system, insert a small pin or similar object into the hole for the reset button and press down for at least one second. Reset button 2 Hold down the MIC MUTE button, the MODE button, and the VSS (Virtual Surround Sound) ON/OFF button on the headset, and then slide the POWER switch to ON.
Specifications Power source DC 3.7 V: Built-in lithium-ion rechargeable battery Battery capacity 925 mAh Operating environment temperature 5°C - 35°C Dimensions (w/h/d) Wireless stereo headset: Approx. 183 × 182 × 90 mm Wireless adaptor: Approx. 17.4 × 8.6 × 67.4 mm Weight Wireless stereo headset: Approx. 320 g Wireless adaptor: Approx. 7 g Communication system 2.4 GHz RF Maximum communication range Approx. 10 m*1 Use time when fully charged Approx. 4.0 hours (music with BassImpact™)*2 Approx.
GUARANTEE This product is covered for 12 months from date of purchase by the manufacturer’s guarantee. Please refer to the guarantee supplied in the PS3™ package for full details. The wireless stereo headset for PlayStation®3 brings dynamic sound to your entertainment experience. Please note, wireless products may be affected by the presence of other wireless devices in the general vicinity.
CECHYA-0086 R&TTE Directive “Informal DoC” statement Hereby, Sony Computer Entertainment Inc., declares that this product* is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.eu.playstation.com * For details of the model number, please see above.
" ", "PlayStation" and " Entertainment Inc. " are registered trademarks of Sony Computer "SONY" and " " are registered trademarks of Sony Corporation. eu.playstation.com/ps3 © 2012 Sony Computer Entertainment Europe. All rights reserved.
