Hard disk drive mounting bracket Instruction Manual CECH-ZCD1 7020229
Compatible Hardware PlayStation®3 system (CECH-400x series) Precautions To ensure the safe use of this product, carefully read this instruction manual, the PlayStation®3 instruction manual and the hard disk drive instruction manual before using it and save the manuals for future reference. The parents or guardians of small children should read the manuals for them to ensure that they use the product safely. Safety ˎˎ Do not expose the product to high temperatures, high humidity or direct sunlight.
Attaching the mounting bracket to the hard disk drive The following types of hard disk drive may be used with the PS3™ system: Size 2.5 inch / 63.5 mm (internal type) *1 Interface format Serial ATA *2 *1 Proper operation is not guaranteed for all models. *2 Parallel ATA is not supported. 1 Place the hard disk drive in the mounting bracket. Ensure that the hard disk drive is oriented so that the connectors on the hard disk drive can be accessed from outside of the mounting bracket.
3 Attach the hard disk drive to the mounting bracket with the silver screws. While inserting the screws into the mounting bracket, keep the rubber inserts over the mounting bracket's screw holes. Installing the hard disk drive in the PS3™ system 1 2 3 Press the power button to turn off the PS3™ system. The power indicator turns solid red and the system enters standby mode. Unplug the AC power cord, and then disconnect the other cables from the system.
Install the hard disk drive in the PS3™ system with the blue screw. 6 Attach the HDD bay cover. To remove the hard disk drive from the PS3™ system 1 2 Remove the HDD bay cover. Follow steps 1 to 3 under "Installing the hard disk drive in the PS3™ system" above. Remove the hard disk drive from the PS3™ system. Remove the blue screw. P ull the right side of the handle towards you, then pull the hard disk drive to remove it.
Hints You must back up data on the PS3™ system before installing a hard disk drive if: ˎˎ You are replacing the hard disk drive at a later date by attaching another hard disk drive to the mounting bracket. ˎˎ You are installing a hard disk drive and the mounting bracket in CECH-400xC series models. The data can then be restored to the hard disk drive after installation. For details, refer to the user's guide (manuals.playstation.net/document/).
" ", "PlayStation" and " " are registered trademarks of Sony Computer Entertainment Inc. "SONY" and " " are registered trademarks of Sony Corporation. eu.playstation.com/ps3 © 2012 Sony Computer Entertainment Europe. All rights reserved.
