Instruction Manual

9
GB
Operations
PS-LX300USB.GB.3-198-123-15(3)
To pause playing
Press the UP/DOWN button to raise the stylus
o the vinyl record.
To play a dierent part of the vinyl record
1 After performing step 4, press the UP/
DOWN button, then lift the tone arm.
2 Move the tone arm to the position you
desire.
3 Press the UP/DOWN button.
e tone arm descends to the record, then playback
starts.
To play a 17-cm vinyl record
Place the supplied 45 r/min adaptor on the
spindle.
When you have nished using the adaptor, put
it back in the adaptor tray.
Recording Audio Tracks on
Your Computer
You can record audio tracks of a vinyl record
on your computer by:
• Connecting the turntable and your computer
using the supplied USB cable
• Using the supplied soware, “Sound Forge
Audio Studio LE”
System requirements for the computer to be
connected to the turntable*
• Compliant computer:
IBM PC/AT or compatible computers
• Operating systems:
Windows® XP Home Edition Service Pack 2
or higher
Windows® XP Professional Service Pack 2 or
higher
Windows Vista® Home Basic
Windows Vista® Home Premium
Windows Vista® Business
Windows Vista® Ultimate
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Pre-installed (manufacturer installed only)
– Operating systems other than those listed above are
not supported.
– Windows XP 64 bit and Windows Vista 64 bit are not
supported.
– e supplied Sound Forge Audio Studio LE supports
Windows XP 32 bit and Windows Vista 32 bit/64 bit.
Version 9.0d or higher supports Windows 7 32 bit/64
bit.
• Hardware Environment:
– Port: USB port**
* Required when recording audio tracks of a vinyl
record onto a computer via a USB connection.
** e USB jack of the turntable supports USB (full-
speed).
Continued
