Instruction Manual

14
GB
PS-LX300USB.GB.3-198-123-15(1)
Setting the default playback device in Sound
Forge Audio Studio LE
1 Start the Sound Forge Audio Studio LE
software.
2 Select [Preferences] from the [Options]
menu.
3 Select the [Audio] tab.
4 Select [Microsoft Sound Mapper] from the
[Audio device type] drop-down list.
5 Click [Apply], and then click [OK] to close
the [Preferences] screen.
If you still cannot hear audio
Check the connection. Exit Sound Forge Audio
Studio LE once and then restart the soware.
Recording audio tracks from the
turntable on a computer
For details on recording operations, refer to
the supplied document titled “Recording audio
tracks of a vinyl record to your computer.”
For details about using the soware, refer to
the “Sound Forge Audio Studio LE” quick start
guide (on the supplied CD-ROM) or on-line
help of the soware.
Reference guides for the supplied software
Refer to the following instructions:

e installation guide for “Sound Forge
Audio Studio LE”:
Refer to this supplied manual to install
“Sound Forge Audio Studio LE.”

e “Sound Forge Audio Studio LE” tutorial:
is tutorial provides easy instructions on
how to operate the soware. Aer installing
the soware, the tutorial appears when you
launch the soware for the rst time.

e “Sound Forge Audio Studio LE” quick
start guide (on the supplied CD-ROM):
is provides instructions on the basic
operation of the soware.