Instruction Manual

10
GB
PS-LX300USB.GB.3-198-123-15(1)
Notes
• For the operating environment mentioned above,
the turntable is not guaranteed to operate with all
computers.
• e turntable is not guaranteed to operate with home
built computers, operating systems that are personally
up-graded or multiple operating systems.
• e turntable is not guaranteed to operate with
functions such as system suspend, sleep (stand-by
mode) and hibernation, on all computers.
Installing the supplied software
Before recording, install the supplied soware,
“Sound Forge Audio Studio LE.”
Once you install the soware into your
computer, you do not have to install it again
other than that you need to re-install it.
1 Insert the supplied CD-ROM into the
CD drive of your computer.
2 Install the software according to on-
screen instructions.
Tip
For details about installing the soware, refer to the
“Sound Forge Audio Studio LE” installation guide.
Connecting the USB cable
Connect the turntable and the computer with
the supplied USB cable.
USB cable (supplied)
To the USB port
To the USB jack
Computer
(not supplied)