Version-up Guide

9
a) When using Windows Vista or Windows 7
When performing the
upgrade (see page 6)
There is an error in the upgrade tool.
Please obtain the correct upgrade tool.
Push the [OK] button to exit the upgrade
tool.
Message box Reinstall a complete Version
Up Tool file (see page 4).
A communication error occurred.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and re-
connect it to the computer
(see page 1).
An unexpected error occurred.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and repeat
the procedure from the
beginning.
An upgrade error occurred.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and repeat
the procedure from the
beginning.
When restarting the
connected device (see
page 6)
Failed to acquire the power supply type.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and repeat
the procedure from the
beginning.
An unexpected error occurred.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and repeat
the procedure from the
beginning.
Status Message Location of Message Remedy