Version-up Guide

8
Verifying the
communication status
between the computer
and PMW-EX1/EX3
(see page 5)
There is an error in the connection order
of the device.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Please set the power switch on the
device to the CAMERA positon after
connecting the device to the PC with the
USB cable.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and re-
connect it to the computer
(see page 1).
A communication error occurred.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and re-
connect it to the computer
(see page 1).
An unexpected error occurred.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and repeat
the procedure from the
beginning.
Verifying the power
source of the PMW-
EX1/EX3 (see page 5)
The connected device is operating on
battery.
Please connect an AC adapter, and
push the [Retry] button.
Please push the [Exit] button to exit the
upgrade.
Status/message display
area
Turn off the power of the
PMW-EX1/EX3, and
connect it to an AC power
source.
Failed to acquire the power supply type.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and
connect it to an AC power
source.
Verifying the model
information (see page
5)
The connected device has already been
upgraded.
Press [Exit] to exit the upgrade tool.
Status/message display
area
There is no need to perform
an upgrade.
The model name does not match the
name of the connected device.
Please use the upgrade tool
corresponding to the connected device.
Push the [OK] button to exit the upgrade
tool.
Message box Reinstall the appropriate
Version Up Tool file (see
page 4).
Failed to acquire the power supply type.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Message box Turn off the power of the
PMW-EX1/EX3, and repeat
the procedure from the
beginning.
Status Message Location of Message Remedy