User Manual

89
Setup Menu
Chapter 7 Menus
a) Not displayed when the unit is in 23.98P mode.
965 IMAGE ENHANCER (INPUT UP
CONVERTER)
a)
Set up the operation of the up-converter image enhancer for SD input,
separately from the settings for playback (menu items 950 to 959).
Sub-item pb
: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for playback (menu
items 950 to 959). (Settings for sub-items 2 to 11 under menu item
965 become invalid.)
input: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for sub-items 2 to 11
under menu item 965 (separate settings during input of SD signals
from those during playback).
1 ENH SETTING
2 CONVERT Select the up-converter mode.
EDGE CROP [CROP]
: Select the edge-crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
3 H CROP P When sub-item CONVERT is set to “CROP”, adjust the H-crop
(horizontal crop) position for up-converter output in edge crop mode.
–120 to 0
to 120
4 L BOX P When sub-item CONVERT is set to “L-BOX”, adjust the vertical location
of the position where the picture is cut out for up-converter output in letter
box mode.
–120 to 0
to 120
5 CNV PROC Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE [ADAPT]
: Frame or field is selected automatically.
6 DETAIL Adjust the up-converter image enhancer. Set the sharpness of edge
enhancement.
00 to 40
to 7F (hexadecimal value)
7 LIMITER Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 to 20
to 3F (hexadecimal value)
8 CRISP Adjust the up-converter image enhancer. Set the threshold amplitude at
which low amplitude signals are not emphasized.
00 to 08
to 0F (hexadecimal value)
9 DEPEND Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
00 to 08
to 0F (hexadecimal value)
10 H DETL F Adjust the up-converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz
: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
11 HV RATIO Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 to 03
to 07 (hexadecimal value)
Menu items in the 900s, relating to digital process
Item number Item name Settings