User Manual

88
Setup Menu
Chapter 7 Menus
955 LIMITER (UC)
a)
Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 (HEX) to 20 (HEX)
to 3F (HEX)
956 CRISP THRESHOLD (UC)
a)
Adjust the up-converter image enhancer. Set the threshold amplitude for
emphasis (signals of amplitude lower than the threshold are not
emphasized).
00 (HEX) to 08 (HEX)
to 0F (HEX)
957 LEVEL DEPEND THRESHOLD
(UC)
a)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
00 (HEX) to 08 (HEX)
to 0F (HEX)
958 H DETAIL FREQUENCY (UC)
a)
Adjust the up-converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz
: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
959 H/V RATIO (UC)
a)
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 (HEX) to 03 (HEX)
to 07 (HEX)
Menu items in the 900s, relating to digital process
Item number Item name Settings