User Manual

87
Setup Menu
Chapter 7 Menus
931 DOWN CONVERTER LETTER BOX
MODE
a)
Select the aspect ratio of the down-converter output when menu item
930 is set to “LETTER BOX”.
16:9
: Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.
932 H CROP POSITION (DC)
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the down-converter output when menu item 930 is set to
“EDGE CROP”.
–120 to 0
to 120
934 CROSS COLOR (DC)
a)
Adjust the down-converter cross color.
0 to 8
to 15
935 DETAIL GAIN (DC)
a)
Adjust the down-converter image enhancer. Adjust the sharpness of
edge enhancement.
00 (HEX)
to 7F (HEX)
936 LIMITER (DC)
a)
Adjust the down-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 (HEX) to 20 (HEX)
to 3F (HEX)
937 CRISP (DC)
a)
Adjust the down-converter image enhancer. Set the threshold amplitude
for emphasis (signals of amplitude lower than the threshold are not
emphasized).
00 (HEX)
to 0F (HEX)
938 LEVEL DEPEND THRESHOLD
(DC)
a)
Adjust the down-converter image enhancer. Set the luminance range for
edge enhancement.
00 (HEX) to 08 (HEX)
to 0F (HEX)
939 H DETAIL FREQUENCY (DC)
a)
Adjust the down-converter image enhancer. Set the central frequency for
edge enhancement.
2.6MHz, 3.4MHz, 3.9MHz
, 4.6MHz
940 H/V RATIO (DC)
a)
Adjust the down-converter image enhancer. Set the horizontal/vertical
ratio for edge enhancement.
00 (HEX) to 03 (HEX)
to 07 (HEX)
942 V FILTER SELECT (DC)
a)
Set the vertical interpolation filter coefficient for down-converter output (in
1080 mode only).
If the setting value is large, the vertical resolution is high.
01 (HEX)
to 03 (HEX)
943 CROSS COLOR CRISP (DC)
a)
Set the cross color crisp level for down-converter output.
00 (HEX) to 04 (HEX)
to 0F (HEX)
944 D/C LEGALIZE (DC)
a)
For down-converter output, selects whether to suppress signals with
levels that are lower than the pedestal level.
off
: Do not suppress signals lower than the pedestal level.
on: Suppress signals lower than the pedestal level.
950 UP CONVERTER MODE
a)
Select the up-converter mode.
EDGE CROP [CROP]
: Select the edge crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
951 H CROP POSITION (UC)
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the up-converter output when menu item 950 is set to “EDGE
CROP”.
–120 to 0
to 120
952 LETTER BOX POSITION (UC)
a)
When menu item 950 is set to “LETTER BOX”, adjust the vertical position
where the picture is cut out for up-converter output in letter box mode.
–120 to 0
to 120
953 UP CONVERTER PROCESS
a)
Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE [ADAPT]
: Frame or field is selected automatically.
954 DETAIL GAIN (UC)
a)
Adjust the up-converter image enhancer. Adjust the sharpness of edge
enhancement.
00 (HEX) to 40 (HEX)
to 7F (HEX)
Menu items in the 900s, relating to digital process
Item number Item name Settings