User Manual

80
Setup Menu
Chapter 7 Menus
154 SINGLE CLIP PLAY MODE Put the unit into single clip playback mode, or exit from single clip
playback mode.
off
: Exits from single clip playback mode. (Puts the unit into continuous
playback mode.)
on: Puts the unit into single clip playback mode.
When “on” is selected, the icon indicating single clip playback mode
appears in the basic operation screen. When "play" is selected also in
setup menu item 142, the icon indicating both single clip playback mode
and repeat playback mode appears in the basic operation screen.
161 HDMI OUT SELECT Specify which signal to output from the HDMI OUT connector: the same
signal as the SDI connector output, or the same signal as the SDI
connector output and thumbnails view signal by automatically switching
between them.
auto
: Output the same signal as the SDI connector output and
thumbnails view signal by automatically switching between them.
SDI [sdi]: Output the same signal as the SDI connector output.
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
208 PROTOCOL FOR REMOTE(9P) Select the protocol used with a REMOTE (9P) connector.
VTR
: Sony 9-pin VTR protocol
VDCP: VDCP protocol
214 REMOTE INTERFACE When the remote control switch is set to REMOTE, select the device
from which to remote-control this unit.
9PIN
: Device connected to the REMOTE(9P) connector.
SDI: Device connected to the SD/HDSDI INPUT connector.
257 NETWORK ENABLE Select the remote control switch positions which enable network
connections.
network [net]
: Only when the switch is set to “NET”.
network & remote(9PIN) [n&9P]: When the switch is set to “NET”, and
when the switch is set to “REMOTE” and setup menu item 214 is set
to “9PIN”.
259 NETWORK INTERFACE Select network protocols to be enabled.
FTP/CIFS [ftp]: Enable FTP and CIFS.
NET-RMT [nrmt]: Enable NetAPI and WebAPI.
ALL [all]
: Enable all protocols.
Menu items in the 300s, relating to editing operations
Item number Item name Settings
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
Specify the handling of audio at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade
: Fade out and fade in.
Menu items in the 100s, relating to the control panels
Item number Item name Settings