User Manual

75
Setup Menu
Chapter 7 Menus
a) Not displayed when the unit is in 23.98P mode.
b) Not displayed when the unit is in 59.94P/50P mode.
028 HD CHARACTER Specify whether to superimpose text information on the HD video signal.
Sub-item
1 HD-SDI2 Specify whether to superimpose text information on the video signal output
from the HDSDI OUTPUT 2 (SUPER) connector.
off:Do not superimpose.
on
: Superimpose.
2 HDMI Specify whether to superimpose text information on the video signal output
from the HDMI OUT connector when the HDMI output is the same with the SDI
output.
off: Do not superimpose.
on
: Superimpose.
029 STORED OWNERSHIP Specify whether to enable changing UMID ownership information settings
(COUNTRY, ORGANIZATION and USER).
off
: Do not enable.
on: Enable.
See “Using UMID Data” (page 102) for more information about UMID.
031 RECORDING FORMAT Set the recording format.
AI422: XAVC Intra 1920×1080 422
b)
HD422: HD422
HD420 HQ [420HQ]: HD420 HQ
HD420 HQ1920 [HQ192]: HD420 HQ1920
b)
DVCAM: DVCAM
a)
033 BATTERY END VOLTAGE Sets the voltage to shut down the unit in the battery operation. The battery
near end indicator flashes at +0.7 V of the set voltage.
10.5V
to 13.5V: 10.5 V to 13.5 V in 0.5 V unit.
036 FILE NAMING Set the clip name to be assigned to a clip to record.
Sub-item
1 PREFIX Set the prefix of the clip name (up to 10 characters). The allowable characters
are alphanumeric characters, symbols (! # $ % & ' ( ) + , - . ; = @ [ ] ^ _ { } ~),
and the space character.
CLIP
2 NUMERIC Set the initial value of the numeric part (00001 to 99999, five-digit serial
number) of the clip name.
00001
B01 RECALL SETUP BANK-1 Set to “on” to recall menu bank 1 to replace the current menu settings.
B02 RECALL SETUP BANK-2 Set to “on” to recall menu bank 2 to replace the current menu settings.
B03 RECALL SETUP BANK-3 Set to “on” to recall menu bank 3 to replace the current menu settings.
B11 SAVE SETUP BANK-1 Set to “on” to save current menu settings to menu bank 1.
B12 SAVE SETUP BANK-2 Set to “on” to save current menu settings to menu bank 2.
B13 SAVE SETUP BANK-3 Set to “on” to save current menu settings to menu bank 3.
B20 RESET SETUP MENU Set to “on” to return the settings of the current menu to the factory default
settings.
Item number Item name Settings